Eco Levels
Re: Eco Levels
OK
After some more experiments
https://github.com/rogerclarkmelbourne/ ... SET_V2.zip
Please can you try this version.
It does not do a hardware reset on the C6000 but it sends all the initialisation data and commands etc
After some more experiments
https://github.com/rogerclarkmelbourne/ ... SET_V2.zip
Please can you try this version.
It does not do a hardware reset on the C6000 but it sends all the initialisation data and commands etc
Re: Eco Levels
I have now connected here 2 dual slot hotspots, one simplex hotspot and a commercial Dual freq repeater.
I control all TG's vía BrandMeister Selfcare & Sysop interface.
Filters in the GD77 are off for TS and TG and on for CC
With all previous versions the GD77 lost the audio of many qso's, with the C6000 reset version jump from one qso to another qso in same or another TS, and for example from TG214 to TG 91.
if change the frequency from A/B vfo (one dual to one simplex) receive ok, if change to another hotspot all work and also if change to repeater.
The delays are small in the worst case of multiple transmissions.. for me this version works all OK.
In the part of battery saver I start the GD77 100 % battery at 5AM, power off at 10 AM, power on at 16.15 PM and now is 22.26 PM the battery are 77%... So it's a big advance.
Re: Eco Levels
Download.....VK3KYY wrote: ↑Tue Feb 16, 2021 9:25 pmOK
After some more experiments
https://github.com/rogerclarkmelbourne/ ... SET_V2.zip
Please can you try this version.
It does not do a hardware reset on the C6000 but it sends all the initialisation data and commands etc
Re: Eco Levels
ThankyouEA5SW wrote: ↑Tue Feb 16, 2021 9:29 pmDownload.....VK3KYY wrote: ↑Tue Feb 16, 2021 9:25 pmOK
After some more experiments
https://github.com/rogerclarkmelbourne/ ... SET_V2.zip
Please can you try this version.
It does not do a hardware reset on the C6000 but it sends all the initialisation data and commands etc
PS. I guess I need to get up earlier in the morning, so I can do updates before you guys in Europe go to bed.
Shame no one in the USA has this bug, they are awake for most of my day, until the Europeans wake up... But by then its time for me to go to bed
Re: Eco Levels
Fisrt test appears that work well as reset version... See you tomorrowVK3KYY wrote: ↑Tue Feb 16, 2021 9:30 pmThankyouEA5SW wrote: ↑Tue Feb 16, 2021 9:29 pmDownload.....VK3KYY wrote: ↑Tue Feb 16, 2021 9:25 pmOK
After some more experiments
https://github.com/rogerclarkmelbourne/ ... SET_V2.zip
Please can you try this version.
It does not do a hardware reset on the C6000 but it sends all the initialisation data and commands etc
PS. I guess I need to get up earlier in the morning, so I can do updates before you guys in Europe go to bed.
Shame no one in the USA has this bug, they are awake for most of my day, until the Europeans wake up... But by then its time for me to go to bed
Re: Eco Levels
OK.EA5SW wrote: ↑Tue Feb 16, 2021 9:50 pmFisrt test appears that work well as reset version... See you tomorrowVK3KYY wrote: ↑Tue Feb 16, 2021 9:30 pmThankyou
PS. I guess I need to get up earlier in the morning, so I can do updates before you guys in Europe go to bed.
Shame no one in the USA has this bug, they are awake for most of my day, until the Europeans wake up... But by then its time for me to go to bed
I now need to isolate what things from the full initialisation are actually required.
More testing when you wake up
Re: Eco Levels
Can you try this version
https://github.com/rogerclarkmelbourne/ ... e_init.zip
Try level 1, 2 and 3 and tell me if there is any difference .
I have set the timeout and the duty cycle to always be the value for Level 2 (for all levels 1 - 4)
But the C6000 initialisation varies depending on the level.
Level 1 is the least re-initalisation
Level 2 is medium re-initialisation
Level 3 should be the same as the full re-initialisation, (but not hardware reset) - The same as the previous version.
Thankyou
Re: Eco Levels
I just experienced the loss of receive audio on ECO level 1, my battery was at 38%. It would drop in and out for more than 15 seconds at a time, switching channels did not help. Even turning the radio off and on did not do anything either. I am using Beta 16th Feb 2021
Re: Eco Levels
OK.W8LIO wrote: ↑Wed Feb 17, 2021 1:32 amI just experienced the loss of receive audio on ECO level 1, my battery was at 38%. It would drop in and out for more than 15 seconds at a time, switching channels did not help. Even turning the radio off and on did not do anything either. I am using Beta 16th Feb 2021
I think this a different issue, because the version on 16th Feb doesn't disable the C6000 DMR chip any more.
I've just done a quick test with the battery at 16% (as I run my radio from a bench PSU and I can vary the voltage), and I'm not experiencing that problem, albeit I am making other changes to the firmware.
Are you sure this is related to Eco Level 1 vs Eco Level 0.