New OpenGD77 and OpenMD9600 Beta's . May 31 2022
New OpenGD77 and OpenMD9600 Beta's . May 31 2022
Daniel F1RMB has added an Automatic power off function, where the radio can be configured to turn off after 30, 60, 90, 120 or 180 minutes of no activity.
OpenGD77 version is available here
downloads/GD77/c97ea361af11a1f0923ac81b7c87905bf6273dd4
MD9600 version is available from here
downloads/MD9600/Firmware/cbbe672522bf7 ... 68eca15518
New Voice prompts are available here
downloads/Voice_Prompts/db2f5bdc4f9a76f ... dacffc03e5
For the translators, the 2 new texts are
.auto_power_off = "Auto Pwr-Off" // MaxLen: 16 (with ':' + 30/60/90/120/180 or .no)
.apo_with_rf = "APO with RF" // MaxLen: 16 (with ':' + .yes or .no or .n_a)
I will post to the Localisation thread as well.
OpenGD77 version is available here
downloads/GD77/c97ea361af11a1f0923ac81b7c87905bf6273dd4
MD9600 version is available from here
downloads/MD9600/Firmware/cbbe672522bf7 ... 68eca15518
New Voice prompts are available here
downloads/Voice_Prompts/db2f5bdc4f9a76f ... dacffc03e5
For the translators, the 2 new texts are
.auto_power_off = "Auto Pwr-Off" // MaxLen: 16 (with ':' + 30/60/90/120/180 or .no)
.apo_with_rf = "APO with RF" // MaxLen: 16 (with ':' + .yes or .no or .n_a)
I will post to the Localisation thread as well.
Re: New OpenGD77 and OpenMD9600 Beta's . May 31 2022
Hi Roger and Daniel,
Very nice addition. I see a difference between the GD77 and MD9600. With the MD9600 I have an extra option in General Options to make a choice. "APO With RF: yes or no". This option is not available with the GD77. Is this the intention.
73 Patrick
Very nice addition. I see a difference between the GD77 and MD9600. With the MD9600 I have an extra option in General Options to make a choice. "APO With RF: yes or no". This option is not available with the GD77. Is this the intention.
73 Patrick
Re: New OpenGD77 and OpenMD9600 Beta's . May 31 2022
Hi,
Cheers.
---
Daniel
Ah no, that's a mistake, both options are available on all platforms (except the GD77S). I will email Roger about that.ON6XX wrote: ↑Tue May 31, 2022 6:50 pmHi Roger and Daniel,
Very nice addition. I see a difference between the GD77 and MD9600. With the MD9600 I have an extra option in General Options to make a choice. "APO With RF: yes or no". This option is not available with the GD77. Is this the intention.
73 Patrick
Cheers.
---
Daniel
Re: New OpenGD77 and OpenMD9600 Beta's . May 31 2022
My bad
Somehow I built the GD77 version without the very latest update from Daniel
The correct version is here
downloads/GD77/c97ea361af11a1f0923ac81b7c87905bf6273dd4
Somehow I built the GD77 version without the very latest update from Daniel
The correct version is here
downloads/GD77/c97ea361af11a1f0923ac81b7c87905bf6273dd4
Re: New OpenGD77 and OpenMD9600 Beta's . May 31 2022
Thank you Roger!
73 best regards de Fabio IZ2EIB
73 best regards de Fabio IZ2EIB
Re: New OpenGD77 and OpenMD9600 Beta's . May 31 2022
Having problems with receive and transmit delays on the md-9600 with my hotspot. Used to have the same problem on the gd-77 but sometime it must have gotten fixed. I can monitor with the gd-77 with the same hotspot and hear all incoming transmissions, but the md-9600 misses maybe one out of thirty transmissions. showing signal on the meter but no audio. Same goes for transmissions out at about the same interval. Timing to and from the hotspot seems to be off. Bit error rates are about the same for both radios. BTW this is a duplex modem. I said delays but more like nothing heard unless i do a channel change and back to that channel. Following transmissions after the miss come through again.
Last edited by W8LDO on Thu Jun 09, 2022 3:00 am, edited 2 times in total.
Re: New OpenGD77 and OpenMD9600 Beta's . May 31 2022
i think the problem was on my end in the hotspot settings afterall. sorry guys. Great work on the Open GD77 and Open DM-9600!linkford wrote: ↑Thu Jun 02, 2022 7:11 pmHaving problems with receive and transmit delays on the md-9600 with my hotspot. Used to have the same problem on the gd-77 but sometime it must have gotten fixed. I can monitor with the gd-77 with the same hotspot and hear all incoming transmissions, but the md-9600 misses maybe one out of thirty transmissions. showing signal on the meter but no audio. Same goes for transmissions out at about the same interval. Timing to and from the hotspot seems to be off. Bit error rates are about the same for both radios. BTW this is a duplex hotspot. I said delays, but more like nothing heard unless i do a channel change and back to that channel. Following transmissions after the miss come through again.
Last edited by W8LDO on Thu Jun 09, 2022 2:59 am, edited 4 times in total.
Re: New OpenGD77 and OpenMD9600 Beta's . May 31 2022
I understand 2022 and not 2020?