CPS partial restores of Flash memory

Post Reply
VK3KYY
Posts: 3597
Joined: Sat Nov 16, 2019 3:25 am
Location: Melbourne, Australia
Contact:

CPS partial restores of Flash memory

Post by VK3KYY » Sat Jun 06, 2020 5:58 am

Because people are failing to backup Flash and EEPROM memory after installing the firmware, and then getting the LOW BT VERSION error when they reinstall some versions of the official firmware.

I've had to update the CPS to allow these people to restore just the lower 64k of Flash memory, so that the Hardware Version data is restored.

See

https://github.com/rogerclarkmelbourne/ ... /R20200606

I've also had to upload my backups for the GD-77, DM-1801 and RD-5R to here.

https://github.com/rogerclarkmelbourne/ ... er/backups

Use the partial backups of "Flash_lower_64k" Not the full flash backup, as this will overwrite your individual calibration data

i.e
DM-1801 https://github.com/rogerclarkmelbourne/ ... er_64k.bin
GD-77 https://github.com/rogerclarkmelbourne/ ... er_64k.bin
RD-5R https://github.com/rogerclarkmelbourne/ ... er_64k.bin


But before you restore. Please backup your EEPROM and Flash and the MCU and save the files somewhere safe

Post Reply