Re: gerät schaltet nicht auf DMR
Posted: Sat Jul 15, 2023 1:41 pm
Hallo Thorsten,
ich bin noch recht neu, hatte mein Gerät auch schon mit originaler Firmware zum laufen bekommen.
Dann hat das Gerät den ganzen Codeplug verstümmelt.
Ich hatte die Nase voll und habe auf GD77 umgesattelt.
Dein schönes Codeplug benutz Rufzeichen und ID geändet und alles zurück in das Gerät.
Auf dem ersten Blick ist alles OK, Zone, Kanal gewählt, aber die kleine Zicke macht kein DMR??
Oben in der Ecke steht nichts von DMR? Nur FM und wenn der Repeater sender höre ich es in FM.
Im Channel ist richtig hinterlegt DMR. auch unter Settings. Warum macht er kein DMR? bin komplett ratlos.
mus man erst den Channel in den VFO übernehmen?
73 DG5YHS
Hello Thorsten,
I'm still quite new, had already gotten my device to work with original firmware.
Then the device mutilated the whole code plug.
I was fed up and switched to GD77.
Your beautiful code plug uses callsign and ID changed and everything back into the device.
At first glance, everything is OK, zone, channel chosen, but the little bitch doesn't make a DMR??
There is nothing about DMR in the top corner? Only FM and when the repeater transmitter I hear it in FM.
DMR is correctly stored in the channel. also under Settings. Why doesn't he do DMR? I'm completely at a loss.
Do you have to transfer the channel to the VFO first?
73 DG5YHS
ich bin noch recht neu, hatte mein Gerät auch schon mit originaler Firmware zum laufen bekommen.
Dann hat das Gerät den ganzen Codeplug verstümmelt.
Ich hatte die Nase voll und habe auf GD77 umgesattelt.
Dein schönes Codeplug benutz Rufzeichen und ID geändet und alles zurück in das Gerät.
Auf dem ersten Blick ist alles OK, Zone, Kanal gewählt, aber die kleine Zicke macht kein DMR??
Oben in der Ecke steht nichts von DMR? Nur FM und wenn der Repeater sender höre ich es in FM.
Im Channel ist richtig hinterlegt DMR. auch unter Settings. Warum macht er kein DMR? bin komplett ratlos.
mus man erst den Channel in den VFO übernehmen?
73 DG5YHS
Hello Thorsten,
I'm still quite new, had already gotten my device to work with original firmware.
Then the device mutilated the whole code plug.
I was fed up and switched to GD77.
Your beautiful code plug uses callsign and ID changed and everything back into the device.
At first glance, everything is OK, zone, channel chosen, but the little bitch doesn't make a DMR??
There is nothing about DMR in the top corner? Only FM and when the repeater transmitter I hear it in FM.
DMR is correctly stored in the channel. also under Settings. Why doesn't he do DMR? I'm completely at a loss.
Do you have to transfer the channel to the VFO first?
73 DG5YHS