Complete Italian Codeplug all Repeaters, TG's and Cluster
Complete Italian Codeplug all Repeaters, TG's and Cluster
Full italian codeplug with all repeaters of all Network, all TG's and Cluster made by IU4LEG.
- Attachments
-
- codeplug opengd77 PUBBLICO.dat
- (128 KiB) Downloaded 911 times
Last edited by IU4LEG on Sun Oct 22, 2023 6:18 am, edited 1 time in total.
Re: Complete Italian Codeplug all Repeaters, TG's and Cluster
Channels
DMR-ITALIA , DMR+, IR2UGN , IT-DMR , IR0DV (and perhaps others) have no TG and no Rx Group.
They will default to TG 9, but it would be better if it was assigned an RX Group or a primary contact TG
DMR-ITALIA , DMR+, IR2UGN , IT-DMR , IR0DV (and perhaps others) have no TG and no Rx Group.
They will default to TG 9, but it would be better if it was assigned an RX Group or a primary contact TG
Re: Complete Italian Codeplug all Repeaters, TG's and Cluster
the card BM, DMR-ITALIA, IT-DMR, DMR + in the channel list are empty, I only put them to separate the channels by type of network.
I left the local tg9 on all channels in TS2 by default because it is convenient as a starting point. Users can change the tg when they want by pressing blue + ###.
As for the RX lists, I probably forgot to put them on some channels, by mistake. Obviously users can customize it as they wish.
I took almost 2 months to create this codeplug, but obviously it can be improved.
![Smile :-)](./images/smilies/icon_e_smile.gif)
![Smile :-)](./images/smilies/icon_e_smile.gif)
thank you for your observation, I will try to improve it
Re: Complete Italian Codeplug all Repeaters, TG's and Cluster
Ok.
I just wanted to make sure that people did not have any problems
Updating the Rx group should be enough to fix it
I just wanted to make sure that people did not have any problems
Updating the Rx group should be enough to fix it
Re: Complete Italian Codeplug all Repeaters, TG's and Cluster
ok, I'll make the change in the next few days when I have some time available ![Wink ;-)](./images/smilies/icon_e_wink.gif)
![Wink ;-)](./images/smilies/icon_e_wink.gif)
Re: Complete Italian Codeplug all Repeaters, TG's and Cluster
I know how difficult it is.
VK7ZCR and I are trying to make an all Australia codeplug, and even after many hours it still has a lot of problems ;-(
VK7ZCR and I are trying to make an all Australia codeplug, and even after many hours it still has a lot of problems ;-(
Re: Complete Italian Codeplug all Repeaters, TG's and Cluster
version 2.0 of the Italian codeplug modified for the new CPS. I have also entered the reception list for each channel and set the appropriate time slot for each TG and Cluster.
73 of IU4LEG
73 of IU4LEG
- Attachments
-
- codeplug opengd77 V2 PUBLIC ITA FULL.g77
- (128 KiB) Downloaded 726 times
Re: Complete Italian Codeplug all Repeaters, TG's and Cluster
Thank you very much Fabio!
73 best regards de Fabio IZ2EIB
73 best regards de Fabio IZ2EIB
Re: Complete Italian Codeplug all Repeaters, TG's and Cluster
My actual CPS, a bit similar to yours. Less neat than your.
Feel free to suggest improvements!
Feel free to suggest improvements!
- Attachments
-
- CPS IU5MGQ - 20200218 V2.3beta2.g77
- (128 KiB) Downloaded 494 times