brandmeister.network Export

Post your OpenGD77 codeplugs here
Post Reply
SO9S
Posts: 10
Joined: Wed Jan 25, 2023 8:02 pm

brandmeister.network Export

Post by SO9S » Thu Jan 26, 2023 1:25 pm

Is there any tool or possibility to export repeaters data from brandmeister.network to CSV file?

This way it would be easy to make a CSV for import into codeplug. Brandmeister.network has all the necessary data (TX, RX, CC, TS, and additionally, e.g. locations), so you can get a nice list of channels by filtering e.g. by country or region.

OE1JTB
Posts: 11
Joined: Tue Jan 24, 2023 10:26 pm

Re: brandmeister.network Export

Post by OE1JTB » Thu Jan 26, 2023 4:42 pm

Did you try repeaterbook export

VE2NCK
Posts: 38
Joined: Tue Jan 17, 2023 4:24 am

Re: brandmeister.network Export

Post by VE2NCK » Thu Jan 26, 2023 6:53 pm

did you try DMR Codeplug Editor by G6AMU , its a bit dated but the import function works fine
you might be able to do it and export using cvs
good luck

SO9S
Posts: 10
Joined: Wed Jan 25, 2023 8:02 pm

Re: brandmeister.network Export

Post by SO9S » Fri Jan 27, 2023 7:08 am

Thanks. I checked both answers, but in both cases the repeater database for Poland is inconsistent. RepeaterBook has only 22 repeaters out of about 96 available in Poland. DMR Codeplug Editor by G6AMU has http://ham-digital.org/status/rptrs.csv as a repeaters source. After downloading this database, it turned out that there are 178 repeaters, so a lot more, and on the list I also see analog ones marked as DMR.
So I don't think I can find an automatic way.

OE1JTB
Posts: 11
Joined: Tue Jan 24, 2023 10:26 pm

Re: brandmeister.network Export

Post by OE1JTB » Fri Jan 27, 2023 11:01 am

.
Last edited by OE1JTB on Mon Feb 06, 2023 7:22 am, edited 1 time in total.

SO9S
Posts: 10
Joined: Wed Jan 25, 2023 8:02 pm

Re: brandmeister.network Export

Post by SO9S » Fri Jan 27, 2023 11:37 am

All in all, it wasn't too hard to copy the data from brandmeister.network and process it in Excel. I'll post it in the appropriate forum later.

Post Reply