Hi,
I recently got a Baofeng DM-1801 and updated to the OpenGD77 firmware (Jul. 11 2021 release). However, I realized that there is a newer firmware (Oct. 2 2021) available so when I tried updating the firmware through the CPS, it seemed to be successful but upon checking the Firmware Info on my radio, it still shows the firmware as Jul 11. 2021. Therefore, none of the newer features (satellite, position, etc) are on my radio.
I tried loading & updating the firmware several times but there was still no change.
I'm using Windows 10 and the latest GD77 CPS (Version E2021.09.14.01).
Hope I can get some support on this issue.
Thanks and 73,
Karl 9W2IXY
DM-1801 not updating to latest firmware
- Fecskebeka
- Posts: 105
- Joined: Thu Jun 03, 2021 7:36 pm
- Location: Hungary
Re: DM-1801 not updating to latest firmware
Hello
Use this
https://www.opengd77.com/downloads/PublicBeta_20211002/
I also have a dm1801. Several pieces.
It works
I updated the firmware dated July 11, 2021
Or there must be another problem
Greetings
Zs
Use this
https://www.opengd77.com/downloads/PublicBeta_20211002/
I also have a dm1801. Several pieces.
It works
I updated the firmware dated July 11, 2021
Or there must be another problem
Greetings
Zs
Re: DM-1801 not updating to latest firmware
Thank you very much for the quick response!
I downloaded the firmware and it now works! Looks like I was using the wrong link from an older post to download the firmware.
Thanks and 73,
Karl 9W2IXY
I downloaded the firmware and it now works! Looks like I was using the wrong link from an older post to download the firmware.
Thanks and 73,
Karl 9W2IXY
- Fecskebeka
- Posts: 105
- Joined: Thu Jun 03, 2021 7:36 pm
- Location: Hungary
Re: DM-1801 not updating to latest firmware
Hooray!
73
73
Re: DM-1801 not updating to latest firmware
yes, I had the same problem.
I figured out that you must use the latest CPS for the firmware to load properly.
73's
Luca
I figured out that you must use the latest CPS for the firmware to load properly.
73's
Luca