MD-9600 / RT-90 Installation

Post Reply
VK3KYY
Posts: 7590
Joined: Sat Nov 16, 2019 3:25 am
Location: Melbourne, Australia

Re: MD-9600 / RT-90 Installation

Post by VK3KYY » Wed Jan 18, 2023 9:22 pm

G4EML wrote:
Wed Jan 18, 2023 8:58 pm
With the V2.1 PCB you should be using either the MD9600_firmware_V1HW or the MD9600_firmware_V2HW firmware. The only difference is the backlight dimming.

Colin G4EML
Sounds likle he already tried all versions of the firmware, and none of them produced any RF. So I wondered whether the radio he got from a friend may not actually be working in the first place

DF1OG
Posts: 37
Joined: Thu Mar 17, 2022 8:44 am

Re: MD-9600 / RT-90 Installation

Post by DF1OG » Thu Jan 19, 2023 1:37 pm

Hi Folks,

shit happens... I have opened the MD and found something strange under a capacitor... solder residue. With the official Firmware the TX output was given. But after handling on my desk the solder has hiked under the capacitor and caused a short cut. Removed and V2 FW works perfectly now. Thanks a lot!
Best regards
Ingo DF1OG

DF1OG
Posts: 37
Joined: Thu Mar 17, 2022 8:44 am

Re: MD-9600 / RT-90 Installation

Post by DF1OG » Thu Jan 19, 2023 1:52 pm

Solder_Residue.jpg
Solder_Residue.jpg (31.34 KiB) Viewed 7913 times

SA0BUX
Posts: 584
Joined: Tue Jul 05, 2022 8:50 am
Location: JO99ah, Stockholm, Sweden
Contact:

Re: MD-9600 / RT-90 Installation

Post by SA0BUX » Thu Jan 19, 2023 3:26 pm

DF1OG wrote:
Thu Jan 19, 2023 1:52 pm
Solder_Residue.jpg
So that blob of solder was loose inside the radio and suddenly shorted the capacitator ?

VK3KYY
Posts: 7590
Joined: Sat Nov 16, 2019 3:25 am
Location: Melbourne, Australia

Re: MD-9600 / RT-90 Installation

Post by VK3KYY » Thu Jan 19, 2023 7:39 pm

Wow. I think you are lucky that the solder blob did not cause a big problem by damaging something important.

MM0EFJ
Posts: 5
Joined: Sat Jan 21, 2023 7:24 pm

Re: MD-9600 / RT-90 Installation

Post by MM0EFJ » Mon Jan 23, 2023 9:19 am

I am following the instructions in this thread to try and install GD77 Firmware on my MD9600 (V2)
However some of the links do not seem to work any more.
I need to know EXACTLY where to find the official firmware (donor) file and the Open Firmware file to suit my specific radio.
If somebody could please advise me of the links for these I would appreciate it very much.
Thanks in anticipation
Mike MM0EFJ

SA0BUX
Posts: 584
Joined: Tue Jul 05, 2022 8:50 am
Location: JO99ah, Stockholm, Sweden
Contact:

Re: MD-9600 / RT-90 Installation

Post by SA0BUX » Mon Jan 23, 2023 9:56 am

MM0EFJ wrote:
Mon Jan 23, 2023 9:19 am
I am following the instructions in this thread to try and install GD77 Firmware on my MD9600 (V2)
However some of the links do not seem to work any more.
I need to know EXACTLY where to find the official firmware (donor) file and the Open Firmware file to suit my specific radio.
If somebody could please advise me of the links for these I would appreciate it very much.
Thanks in anticipation
Mike MM0EFJ
Hi, I have also a MD-9600 (V2)

I noticed that downloads/MD9600/FirmwareLoader/readme.html is removed now but the donor
firmware is here:

https://www.passion-radio.com/index.php ... chment=760

The latest Open firmware for MD-9600: downloads/MD9600/Firmware/Latest

For a V2 HW it is this file: downloads/MD9600/Firmware/Latest/MD9600 ... e_V2HW.bin

Latest OpenGD77 CPS: downloads/CPS/Latest
Last edited by SA0BUX on Mon Jan 23, 2023 10:52 am, edited 1 time in total.

VK3KYY
Posts: 7590
Joined: Sat Nov 16, 2019 3:25 am
Location: Melbourne, Australia

Re: MD-9600 / RT-90 Installation

Post by VK3KYY » Mon Jan 23, 2023 10:03 am

SA0BUX wrote:
Mon Jan 23, 2023 9:56 am
MM0EFJ wrote:
Mon Jan 23, 2023 9:19 am
I am following the instructions in this thread to try and install GD77 Firmware on my MD9600 (V2)
However some of the links do not seem to work any more.
I need to know EXACTLY where to find the official firmware (donor) file and the Open Firmware file to suit my specific radio.
If somebody could please advise me of the links for these I would appreciate it very much.
Thanks in anticipation
Mike MM0EFJ
Hi, I have also a MD-9600 (V2)

I noticed that downloads/MD9600/FirmwareLoader/readme.html is removed now but the donor
firmware is here:

https://www.passion-radio.com/index.php ... chment=760

The latest Open firmware for MD-9600: downloads/MD9600/Firmware/Latest

For a V2 HW it is this file: downloads/MD9600/Firmware/Latest/MD9600 ... e_V2HW.bin
Thanks.
Somehow the FirmwareLoader folder has been deleted, probably as there is no longer a standalone loader for the radios, as the loader for all radios is now integrated into the CPS

I have ammended the main instructions to include the link to the donor firmware

MM0EFJ
Posts: 5
Joined: Sat Jan 21, 2023 7:24 pm

Re: MD-9600 / RT-90 Installation

Post by MM0EFJ » Mon Jan 23, 2023 1:41 pm

Thanks to SA0BUX and VK3KYY for prompt replies
I will try that and advise how I get on.
Thanks again,
Mike MM0EFJ

VK3KYY
Posts: 7590
Joined: Sat Nov 16, 2019 3:25 am
Location: Melbourne, Australia

Re: MD-9600 / RT-90 Installation

Post by VK3KYY » Sat Feb 11, 2023 9:26 pm

sq2tac wrote:
Sat Feb 11, 2023 9:18 pm
----LINK REMOVED---
Please do not post links to these sorts of videos

Potentially the video may contain incorrect information, and the moderators to not have time to check links to videos.

Post Reply