Page 1 of 2

DMR Rx clicking and other sound problems

Posted: Sun Jan 02, 2022 11:30 pm
by VK3KYY
FYI

We currently have a small problem where if the radio is in DMR mode, occasionally there is a buzz sound from the speaker.

This can often occur when a repeater carrier stops transmitting, but also seems to be triggered by random QRM.

We tried to fix this by filling the DMR audio buffer with silence when the DMR Rx signal ends, however this seemed to cause clicking during DMR Rx on some radios.

So I had to remove this buffer clearing, and the next private alpha will have the noises again, until we can find another solution to the problem, because removing the clicking from the DMR Rx audio is more important than the occasional buzz noise

Re: DMR Rx clicking and other sound problems

Posted: Mon Jan 03, 2022 12:58 pm
by EA5SW
Sometimes the audio it's like distorting, and it creeps into modulation... don't have any reason, sometimes distort and some not...

Re: DMR Rx clicking and other sound problems

Posted: Mon Jan 03, 2022 8:56 pm
by VK3KYY
EA5SW wrote:
Mon Jan 03, 2022 12:58 pm
Sometimes the audio it's like distorting, and it creeps into modulation... don't have any reason, sometimes distort and some not...
OK

We are fixing the I2S audio bus problems, but I dont know if the distortion is the on the I2S or whether its perhaps some errors in the DMR audio data.

We do not have a method to detect Rx BER in either the GD77 or MD9600 firmware, so its difficuoit to know where the problem is occurring

Re: DMR Rx clicking and other sound problems

Posted: Thu Jan 06, 2022 4:05 am
by VK3KYY
We think we have a fix for the DMR Rx clicking problem

It was being caused by the I2S buffer being emptied by the C6000 under some conditions

Re: DMR Rx clicking and other sound problems

Posted: Thu Jan 06, 2022 1:12 pm
by ON6XX
VK3KYY wrote:
Thu Jan 06, 2022 4:05 am
We think we have a fix for the DMR Rx clicking problem

It was being caused by the I2S buffer being emptied by the C6000 under some conditions
Very nice, I hear no longer clicks on DMR RX.

Re: DMR Rx clicking and other sound problems

Posted: Wed Jun 01, 2022 9:58 am
by G4EML
You don’t have this problem, it was specific to the firmware during development and is not something a user can change.

Colin

Re: DMR Rx clicking and other sound problems

Posted: Fri Sep 30, 2022 1:42 pm
by pu7veg
Hello, my Md9600 makes these clicks on the speaker at the end of the analog RX and dmr even with volume at zero, is there a solution?

Re: DMR Rx clicking and other sound problems

Posted: Fri Sep 30, 2022 2:36 pm
by G4EML
This is a design flaw with some versions of these radios.
It needs a hardware mod to fix it.

https://www.pc5e.nl/downloads/rt82/manu ... bridge.pdf


Colin G4EML

Re: DMR Rx clicking and other sound problems

Posted: Fri Sep 30, 2022 8:38 pm
by VK3KYY
G4EML wrote:
Fri Sep 30, 2022 2:36 pm
This is a design flaw with some versions of these radios.
It needs a hardware mod to fix it.

https://www.pc5e.nl/downloads/rt82/manu ... bridge.pdf


Colin G4EML
There is also a click suppression option in the Sound Options screen

Re: DMR Rx clicking and other sound problems

Posted: Sat Oct 01, 2022 1:35 am
by pu7veg
VK3KYY wrote:
Fri Sep 30, 2022 8:38 pm
G4EML wrote:
Fri Sep 30, 2022 2:36 pm
This is a design flaw with some versions of these radios.
It needs a hardware mod to fix it.

https://www.pc5e.nl/downloads/rt82/manu ... bridge.pdf


Colin G4EML
There is also a click suppression option in the Sound Options screen
Many thanks to all of you, super solved here, the clicks are gone.