Power display calibration volts

Post Reply
UR5TNF
Posts: 12
Joined: Sat Jun 18, 2022 7:43 am
Location: Ukraine

Power display calibration volts

Post by UR5TNF » Sun Jun 19, 2022 3:03 pm

Good afternoon, for a long time I want to ask this question about the voltage correction (v). When 13.8v is applied, the radio displays 14.2v. All attempts to set the correction -0.4v do not work. How to set the correct voltage. Does this option work or not??? Sorry for the broken English, I use google translator. Please developers answer this question .... how to properly calibrate the md9600 supply voltage display

User avatar
F1RMB
Posts: 2517
Joined: Sat Nov 16, 2019 5:42 am
Location: Grenoble, France

Re: Power display calibration volts

Post by F1RMB » Sun Jun 19, 2022 3:32 pm


UR5TNF
Posts: 12
Joined: Sat Jun 18, 2022 7:43 am
Location: Ukraine

Re: Power display calibration volts

Post by UR5TNF » Sun Jun 19, 2022 3:47 pm

Thanks I know. But probyval does not work!!!! rebuilt -0.4 and does not work!!! still displays 14.2v

this calibration does not work

User avatar
F1RMB
Posts: 2517
Joined: Sat Nov 16, 2019 5:42 am
Location: Grenoble, France

Re: Power display calibration volts

Post by F1RMB » Sun Jun 19, 2022 4:49 pm

UR5TNF wrote:
Sun Jun 19, 2022 3:47 pm
Thanks I know. But probyval does not work!!!! rebuilt -0.4 and does not work!!! still displays 14.2v

this calibration does not work
take a deep breath, everything will be fine.

User avatar
F1RMB
Posts: 2517
Joined: Sat Nov 16, 2019 5:42 am
Location: Grenoble, France

Re: Power display calibration volts

Post by F1RMB » Sun Jun 19, 2022 5:38 pm

It will work in the next firmware release.

Post Reply