is there any way you could add to the "firmware info" screen which hardware version was loaded? or does it already show that somehow? i have three radios all with different hw version and forget which is which! i'll have to open them up again, check the hw version, to get the right version. i will scribe on the outside case what the inside is the next time i open them, but just a convenience suggestion. thanks again for all the amazing work ya'll do my opengd radios are my favorite because of you!
73 de AF6MQ
--gaspo.
New Beta version 2022 11 26
Re: New Beta version 2022 11 26
JA version is for Japanesenuleking wrote: ↑Fri Jan 20, 2023 7:15 pmFirst of all thank you for your work:VK3KYY wrote: ↑Fri Nov 25, 2022 9:48 pmNew Beta version with changes to the DMR APRS transmission
In the last version DMR APRS transmission required the Talker Alais text to also be sent.
In this version Talker Alias transmission control has been removed from the Radio Options, and is now 'Per channel', in that you need to enable Talker Alias or DMR APRS transmission on the channel and Timeslot
Options for TA transmission are
Off, APRS, Text, Both (APRS & Text)
downloads/MD9600/Firmware/43f037fe43215 ... e3fea400f5
downloads/MD9600/Firmware/Latest
CPS has been updated to support this change to the channel details.
https://opengd77.com/downloads/CPS/Late ... .25.02.exe
Voice prompts have also been updated to support this version
downloads/Voice_Prompts/latest/
Translation files will be posted soon.
what is the difference between JA_MD9600 and MD9600 firmware?
Best regards