Page 1 of 2

New new MD-9600 and RT-90 is not currently compatible

Posted: Sun Jan 29, 2023 12:01 am
by VK3KYY
TYT, who make both the MD-9600 and the RT-90, seem to have changed their CPU supplier and are now using unbranded chinese made CPU chips in their radios, which are not compatible with the firmware

We have now received reports of MD-9600 / RT-90 using the unbranded CPU chips and hence these radios are also not compatible with the firmware.

I checked and the STM32F405 CPU does seem to have supply problems e.g.
https://au.mouser.com/c/?q=stm32f405VGT

Which don't seem to be forecast to be resolved until the end of the year


So I would not recommend anyone buy a new MD-9600 or RT-90 unless the vendor can guarantee that the radio has a genuine STM32F405VGT CPU in it.

Re: New new MD-9600 and RT-90 is not currently compatible

Posted: Mon Jan 30, 2023 9:29 pm
by G4EML
Yes.

The clone chips are unmarked. At the moment we have not heard of any in MD9600 radios.

Re: New new MD-9600 and RT-90 is not currently compatible

Posted: Thu Feb 02, 2023 6:39 pm
by OE1JTB
.

Re: New new MD-9600 and RT-90 is not currently compatible

Posted: Sun Feb 05, 2023 10:17 am
by OE1JTB
.

Re: New new MD-9600 and RT-90 is not currently compatible

Posted: Sun Feb 05, 2023 4:25 pm
by SA0BUX
Do we have some report that MD-9600/RT90 have delivered radios with the clone chip?

I see it more like a warning that it can be affected similar to MD-UV380/MD-UV390 /RT3S

BTW, the subject "IMPORTANT. New new MD-600 and RT-90 may no longer be compatible" should be:

"IMPORTANT. New new MD-9600 and RT-90 may no longer be compatible"

Re: New new MD-9600 and RT-90 is not currently compatible

Posted: Sun Feb 05, 2023 6:43 pm
by OE1JTB
.

Re: New new MD-9600 and RT-90 is not currently compatible

Posted: Sun Feb 05, 2023 7:35 pm
by VK3KYY
OE1JTB wrote:
Sun Feb 05, 2023 10:17 am
So we got the first message, that NON GPS version from passion radio, which they got new from the supplier, has the new chip, no OPENGD77 possible :roll:
production date 2247
my working 2 pieces with GPS have 2213 and 2233
Thanks.

Colin and I thought that eventually TYT would use the non,-genuine CPU chip, because of extreme shortage of the genuine chip

Re: New new MD-9600 and RT-90 is not currently compatible

Posted: Sun Feb 05, 2023 7:56 pm
by OE1JTB
.

Re: New new MD-9600 and RT-90 is not currently compatible

Posted: Sun Feb 05, 2023 9:26 pm
by VK3KYY
OE1JTB wrote:
Sun Feb 05, 2023 7:56 pm
Strange that inside also V4A hardware is printed, while above here you can see V5 hardware with working STM32...
Yes. That is strange.

It points to TYT outsourcing the PCB assembly to multiple companies, some of which still have old stocks of the PCB which they are fitting with the non-genuine MCU/CPU


Ideally anyone who receives a MD-9600 / RT-90 and was able to install the firmware, should open the radio to check whether the CPU is genuine or unmarked / fake

There are multiple types of fake STM32F4 in circulation and even some semi-authorised clones e.g. GD32F407, so potentially some fakes may work with the firmware, but as the fake is unmarked, its impossible to know what it is, or why it doesn't work.

Re: New new MD-9600 and RT-90 is not currently compatible

Posted: Sun Feb 05, 2023 10:48 pm
by SA0BUX
OE1JTB wrote:
Sun Feb 05, 2023 6:43 pm
SA0BUX wrote:
Sun Feb 05, 2023 4:25 pm
Do we have some report that MD-9600/RT90 have delivered radios with the clone chip?

I see it more like a warning that it can be affected similar to MD-UV380/MD-UV390 /RT3S

BTW, the subject "IMPORTANT. New new MD-600 and RT-90 may no longer be compatible" should be:

"IMPORTANT. New new MD-9600 and RT-90 may no longer be compatible"
Did you read my post?
yes we have
This post ?, it was a bit unclear and I haven't seen that "message" myself.
So we got the first message, that NON GPS version from passion radio, which they got new from the supplier, has the new chip, no OPENGD77 possible :roll:
production date 2247
my working 2 pieces with GPS have 2213 and 2233