Page 1 of 1
MD-9600/RT-90 Schematic
Posted: Thu Mar 07, 2024 8:46 am
by SA0BUX
A schematic was posted to the Facebook OpenGD77 group, thanks to Duane !
https://www.sa0bux.se/Ham/opengd77/ELEC ... MD9600.pdf
Re: MD-9600/RT-90 Schematic
Posted: Thu Mar 07, 2024 9:05 am
by VK3KYY
Thanks I already have the schematic but didn't publish it becasue of copyright.
Re: MD-9600/RT-90 Schematic
Posted: Thu Mar 07, 2024 10:06 am
by SA0BUX
VK3KYY wrote: ↑Thu Mar 07, 2024 9:05 am
Thanks I already have the schematic but didn't publish it becasue of copyright.
OK
One thing I don't recognize is on the first page :
H1 Hole, H2 Hole etc
You know what it is?
Re: MD-9600/RT-90 Schematic
Posted: Thu Mar 07, 2024 10:34 am
by G4EML
They are holes!
Because this is a schematic from a PCB design program you have to define everything that is connected together. The mounting holes have to be connected to ground.
This is also a very early schematic for V2 radios. It will not be correct for later versions. However it is the only one available.
Colin G4EML