10 Watts not showing or is it 1 watt

[MM7TMX]

I loaded OpenGD77 yesterday on my TYT MD-UV390 plus, everything seems to work well however the radio only shows 1W in the top bar, I've gone into Option/Radio Option/User Power which currently can only be adjusted to 4100 maximum, however no matter how I adjust this the top bar still says 1W

Can anyone tell me how to get the full 10W or at least 5W which would be better than the current 1W, unless of course the 1W is an error/bug and just missing the digit 0 to make it read 10

[PU7TKM]

Have you tried changing the power? On my DM1701, it's SK2 (I believe. It's the bottom button on the left side) and P2.

Here's the DM1701 for reference:

[MM7TMX]

thanks, but the bottom button doesn't seem to change anything on mine, Ive tried short and long press but it has no impact

[F1RMB]

I loaded OpenGD77 yesterday on my TYT MD-UV390 plus, everything seems to work well however the radio only shows 1W in the top bar, I've gone into Option/Radio Option/User Power which currently can only be adjusted to 4100 maximum, however no matter how I adjust this the top bar still says 1W

Can anyone tell me how to get the full 10W or at least 5W which would be better than the current 1W, unless of course the 1W is an error/bug and just missing the digit 0 to make it read 10

You need to read the user manual.

[i5ekx]

thanks, but the bottom button doesn't seem to change anything on mine, Ive tried short and long press but it has no impact

Look here: viewtopic.php?f=19&t=4237&start=10

[PU7TKM]

thanks, but the bottom button doesn't seem to change anything on mine, Ive tried short and long press but it has no impact

I meant SK2+P2.

The user above posted a video that seems to be actually SK2+UP on your model.

You need to press both buttons together, like Ctrl+C, starting with SK2.

[yt5plb]

it is work on me...tx