Yes, I was just able to access the website using Tor Browser.
TYT MD-UV380 / RT-3S Installation information
Re: ALPHA TYT MD-UV380 / RT-3S Installation information
I got some errors while installing OpenGD77 on my TYT MD-UV390. I downloaded the latest OpenGD77-CPS, firmware and donation file. There is no problem in getting into DFU mode and seeing DFU mode on the computer. But I can't flash the firmware to my beloved TYT radio.
Here are some screenshots
What might be the problem?
Here are some screenshots
What might be the problem?
Re: ALPHA TYT MD-UV380 / RT-3S Installation information
Did you install the DFU driver?
Also. I don't know why you referenced the donor file. You do not upload the donor file to the radio, the donor file is automatically merged by the CPS
Also. I don't know why you referenced the donor file. You do not upload the donor file to the radio, the donor file is automatically merged by the CPS
Re: ALPHA TYT MD-UV380 / RT-3S Installation information
Yes, I choose donor file via CPS as stated in your YouTube video. I think the DFU driver is fine; as I see STM device in DFU Mode prompt in device manager. I also tried to flash the original firmware to make sure the DFU driver works. Not any problem appeared.
Re: ALPHA TYT MD-UV380 / RT-3S Installation information
What driver did you install ?TA1ECA wrote: ↑Tue Oct 25, 2022 9:42 amYes, I choose donor file via CPS as stated in your YouTube video. I think the DFU driver is fine; as I see STM device in DFU Mode prompt in device manager. I also tried to flash the original firmware to make sure the DFU driver works. Not any problem appeared.
My driver version is showing as 3.0.4.0
What USB VID/PID is your radio showing as in the Windows device manager?
Re: ALPHA TYT MD-UV380 / RT-3S Installation information
I installed STMicroelectronics 3.0.1.0 versionVK3KYY wrote: ↑Tue Oct 25, 2022 9:56 amWhat driver did you install ?TA1ECA wrote: ↑Tue Oct 25, 2022 9:42 amYes, I choose donor file via CPS as stated in your YouTube video. I think the DFU driver is fine; as I see STM device in DFU Mode prompt in device manager. I also tried to flash the original firmware to make sure the DFU driver works. Not any problem appeared.
My driver version is showing as 3.0.4.0
What USB VID/PID is your radio showing as in the Windows device manager?
USB\VID_0483&PID_DF11REV_0200
Re: ALPHA TYT MD-UV380 / RT-3S Installation information
That is the same version driver that I am using. So it is unlikely that the driver is your problem.
If the radio is not connected or is not in DFU mode then the error message is different. So presumably your radio is being seen by the driver.
Do you have another computer you could try? Just in case something strange has happened with the driver install.
Colin G4EML
If the radio is not connected or is not in DFU mode then the error message is different. So presumably your radio is being seen by the driver.
Do you have another computer you could try? Just in case something strange has happened with the driver install.
Colin G4EML
Re: ALPHA TYT MD-UV380 / RT-3S Installation information
Yes, that's a good point. I will try with another computer as you suggested. And I will inform immediately.G4EML wrote: ↑Tue Oct 25, 2022 2:31 pmThat is the same version driver that I am using. So it is unlikely that the driver is your problem.
If the radio is not connected or is not in DFU mode then the error message is different. So presumably your radio is being seen by the driver.
Do you have another computer you could try? Just in case something strange has happened with the driver install.
Colin G4EML
Re: ALPHA TYT MD-UV380 / RT-3S Installation information
HiTA1ECA wrote: ↑Tue Oct 25, 2022 5:52 pmYes, that's a good point. I will try with another computer as you suggested. And I will inform immediately.G4EML wrote: ↑Tue Oct 25, 2022 2:31 pmThat is the same version driver that I am using. So it is unlikely that the driver is your problem.
If the radio is not connected or is not in DFU mode then the error message is different. So presumably your radio is being seen by the driver.
Do you have another computer you could try? Just in case something strange has happened with the driver install.
Colin G4EML
try this version - https://drive.google.com/file/d/1gITDj6 ... sp=sharing
good luck
73s
Re: ALPHA TYT MD-UV380 / RT-3S Installation information
The error is that the DFU driver and radio is responding with an error to the STDFU_SelectCurrentConfiguration command
Unfortunately, this functionality is contained inside the DLL files from STM, and not something which we have control over.
How old is your radio. What model is it? UV380 or RT3S ??
Unfortunately, this functionality is contained inside the DLL files from STM, and not something which we have control over.
How old is your radio. What model is it? UV380 or RT3S ??