Amateur radio firmware for the GD-77, GD-77S, DM-1801, DM-1801A, RD-5R, MD-9600/RT-90, MD-UV380/RT-3S, DM-1701/RT-84 and MD2017/RT-82 radios https://www.opengd77.com/
So, I followed the video from page 1 and installed OpenGD77 on my Brandnew Retevis RT 3S. I then made the first entree for the code plug (using Parrot) and what do you know, it worked. The only thing that didn't work for me was to Backup Flash. I let it sit there for good 30 minutes and the bar had almost reached the end but it somehow stopped and did not finish the process. But I think I can live without it.....
Re: TYT MD-UV380 / RT-3S Installation information
Posted: Tue Feb 27, 2024 10:14 pm
by DO1TBP
Hello,
my Question is:
Give it a Open GD77 Version to flash for under Linux, for the RT3S?
For MD380 UV or DM1701 give it this on the first Posting under DM1701 Stable Release.
Thanks!
Hello,
my Question is:
Give it a Open GD77 Version to flash for under Linux, for the RT3S?
For MD380 UV or DM1701 give it this on the first Posting under DM1701 Stable Release.
Thanks!
I don't understand your question
Are you asking how to Flash the firmware onto the UV380/DM1701 using Linux ?
Are you asking how to Flash the firmware onto the UV380/DM1701 using Linux ?
Yes. That is right. But i have also a RT3S and i want on this Radios with the Open GD77 new Codeplugs flashed under Linux.
Windows has many Problems in the last Months and under Wine in Linux, many USB-Ports are not Ok....
Are you asking how to Flash the firmware onto the UV380/DM1701 using Linux ?
Yes. That is right. But i have also a RT3S and i want on this Radios with the Open GD77 new Codeplugs flashed under Linux.
Windows has many Problems in the last Months and under Wine in Linux, many USB-Ports are not Ok....
You can flash the firmware under Linux, for STM32 devices, you will find the Python tool, here downloads/releases/MDUV380_DM1701/R2023 ... and_tools/.
About the CPS, you have no other choice than running it in Windows (in a VM, like VirtualBox).
