Page 1 of 1
Firmware Loader "FM only" instead of "+DMR"
Posted: Fri Dec 02, 2022 6:27 pm
by SP7BRUH
Hi,
I wanted to install OpenGD77 on my TYT MD-UV380, but when I was about to select the official MD-9600 firmware, I noticed that the Firmware Loader window instead of "Firmware loader (...) [ +DMR ]" is called "Firmware loader (...) [ FM only ]".
- screen.png (12.1 KiB) Viewed 1266 times
I changed CPS versions but it didn't help. In each Firmware release the loader was named the same. Should I be concerned? Is my PC the problem? (Windows 11)
Thanks in advance for all advice.
73!
SP7BRUH
Re: Firmware Loader "FM only" instead of "+DMR"
Posted: Fri Dec 02, 2022 6:49 pm
by Ik0nwg
you must use the official firmware MD9600 as described in the installation instructions--- otherwise you will not enable the DMR part--- you must follow the video exactly
as soon as you select the official firmware +DMR will appear
https://opengd77.com/viewtopic.php?f=19&t=2380
it is described exactly between about 5.15 and 7.15 minutes of the video
Ciao
Re: Firmware Loader "FM only" instead of "+DMR"
Posted: Fri Dec 02, 2022 7:23 pm
by SP7BRUH
Thank you for help, but when I was watching the guide, I saw that before selecting the original MD9600 firmware, the name of the window ends with "[ +DMR ]. Do I have anything to worry about or can I upload the firmware without any problems?
- ds.jpg (34.77 KiB) Viewed 1245 times
(screen from tutorial)
Re: Firmware Loader "FM only" instead of "+DMR"
Posted: Fri Dec 02, 2022 7:27 pm
by Ik0nwg
you just have to select the firmware of the 9600... then you will see the writing +DMR and then you can install the firmware of your md380---- you don't have to worry
Re: Firmware Loader "FM only" instead of "+DMR"
Posted: Fri Dec 02, 2022 7:32 pm
by Ik0nwg
if you see the writing +DMR you can go on without problems
Re: Firmware Loader "FM only" instead of "+DMR"
Posted: Fri Dec 02, 2022 8:26 pm
by SP7BRUH
Thanks! It worked. Sorry, sometimes I overthinking. This firmware is awesome! Thanks for help!
Have a nice day!
73!
Re: Firmware Loader "FM only" instead of "+DMR"
Posted: Sat Dec 03, 2022 5:59 am
by Ik0nwg
you don't have to thank me but the great team of opengd77...they are great guys
Ciao