Alpha 2022 12 15

Post Reply
VK3KYY
Posts: 7475
Joined: Sat Nov 16, 2019 3:25 am
Location: Melbourne, Australia

Alpha 2022 12 15

Post by VK3KYY » Thu Dec 15, 2022 7:59 am

New Alpha

downloads/MDUV380/Firmware/25fd03400211 ... 593241c840

downloads/MDUV380/Firmware/Latest

* Manual backlight problem has been fixed, by Colin G4EML
* Backlight "None" option has been removed because setting this option made the radio unusable as the screen can not be viewed without the backlight
* Bug on the Channel screen QuickMeny QuickKeys, found my IK0NWG has been fixed

User avatar
i5ekx
Posts: 37
Joined: Fri Dec 09, 2022 3:14 pm
Location: JN53DM
Contact:

Re: Alpha 2022 12 15

Post by i5ekx » Sun Jan 01, 2023 6:51 pm

Many many thanks, the continued development work is greatly appreciated, 73 from Italy de I5EKX Alex.

EA5JAQ
Posts: 86
Joined: Thu Jul 16, 2020 6:08 am

Re: Alpha 2022 12 15

Post by EA5JAQ » Tue Jan 10, 2023 12:19 pm

Hello,

I think I found a small bug related to the Eco levels. This is how to replicate it:

1. Select any Eco level. The radio needs to be in 'Beep' prompt mode.
2. Enter the main menu (or really any menu, but it doesn't happen in the Channel or VFO screens).
3. Leave the radio untouched for, more or less 2x the entry delay (for example, 8 seconds for level 5).
4. If you then turn the rotary, a loud 'click' is heard. This sometimes happens with any key too (and sometimes doesn't), but always happens with the rotary.

If it's related to the eco level getting started, I don't know why it doesn't happen after the actual entry delay. It happens after twice that time (20, 16, 12, 8 and 8 seconds, respectively).

Hope this helps.
73

Edit: I should've posted this in 'Known problems'. Sorry about that.

User avatar
i5ekx
Posts: 37
Joined: Fri Dec 09, 2022 3:14 pm
Location: JN53DM
Contact:

Re: Alpha 2022 12 15

Post by i5ekx » Fri Jan 13, 2023 10:44 am

Problem with VOX, I tried to enable it, but after a few seconds the radio goes on transmission even in the complete absence of noise. I changed the vox threshold values, nothing, it starts in TX and stays there, does it only happen to me?

Post Reply