-
ub3wbm
- Posts: 4
- Joined: Sun Jan 08, 2023 8:38 am
Post
by ub3wbm » Mon May 22, 2023 7:58 am
I can replace flash spi?
For example, installation w25q128 on 16 MB...
-
F1RMB
- Posts: 2621
- Joined: Sat Nov 16, 2019 5:42 am
- Location: Grenoble, France
Post
by F1RMB » Mon May 22, 2023 10:00 am
ub3wbm wrote: ↑Mon May 22, 2023 7:58 am
I can replace flash spi?
For example, installation w25q128 on 16 MB...
Transceiver ?
Don't forget to post
there
-
ub3wbm
- Posts: 4
- Joined: Sun Jan 08, 2023 8:38 am
Post
by ub3wbm » Mon May 22, 2023 10:20 am
F1RMB wrote: ↑Mon May 22, 2023 10:00 am
Transceiver ?
Yes, RT-3S.
Thanks.
-
VK3KYY
- Posts: 7590
- Joined: Sat Nov 16, 2019 3:25 am
- Location: Melbourne, Australia
Post
by VK3KYY » Mon May 22, 2023 10:29 am
ub3wbm wrote: ↑Mon May 22, 2023 10:20 am
F1RMB wrote: ↑Mon May 22, 2023 10:00 am
Transceiver ?
Yes, RT-3S.
Thanks.
The MD-UV380 / RT-3S already contains a 16Mb flash chip. In fact I think the flash chip is a 25Q128
-
F1RMB
- Posts: 2621
- Joined: Sat Nov 16, 2019 5:42 am
- Location: Grenoble, France
Post
by F1RMB » Mon May 22, 2023 10:31 am
Hi,
Yes, that's this one
Cheers.
----
Daniel
-
VK3KYY
- Posts: 7590
- Joined: Sat Nov 16, 2019 3:25 am
- Location: Melbourne, Australia
Post
by VK3KYY » Mon May 22, 2023 10:36 am
F1RMB wrote: ↑Mon May 22, 2023 10:31 am
Hi,
Yes, that's this one
Cheers.
----
Daniel
What a pointless post in the first place, wasted everyone's time.
-
ub3wbm
- Posts: 4
- Joined: Sun Jan 08, 2023 8:38 am
Post
by ub3wbm » Wed May 24, 2023 3:30 pm
PCB not assembly second w25q128, can placed?
-
Attachments
-
- 1684942100964.jpg (136.88 KiB) Viewed 1523 times
-
VK3KYY
- Posts: 7590
- Joined: Sat Nov 16, 2019 3:25 am
- Location: Melbourne, Australia
Post
by VK3KYY » Wed May 24, 2023 9:30 pm
ub3wbm wrote: ↑Wed May 24, 2023 3:30 pm
PCB not assembly second w25q128, can placed?
How do you know these pads are for a Flash memory chip? How is it connected to the CPU?