Retevis rt3s after last update (Beta 2023 09 15) hotspot problems

[S54BR]

When I put the retevis rt3s on the hotspot, it no longer works for me on the broadcast, or broadcasts once, then there is silence. It no longer receives or transmits anything. When I turn the station back on, it all happens again. It was working fine before the last update. Anyone else have this problem. I work with Bluedv. The settings are the same as before the update.
thank you

[F1RMB]

Hi,

It's not super clear.
You mean you're using BlueDV. But you're not telling us the operating system and the BlueDV version.


Cheers.
---
Daniel

[S54BR]

Sorry for the incomplete information. I am using windows 10 and bluedv is BlueDV-9632 version

[F1RMB]

Hi,

I just tried, with the same software, and it works as expected.


Cheers.
---
Daniel

[F1RMB]

Does your RT3S switch to hotspot mode once you enable serial connection into the BlueDV software ?

[S54BR]

Does your RT3S switch to hotspot mode once you enable serial connection into the BlueDV software ?

yes, it switches fine, but reception and transmission do not work.

[F1RMB]

Okay.

Double check all the settings (BlueDV and the channel on your RT3S, like to be in simplex, ColorCode, etc).

Nothing has changed in this area.

[S54BR]

Okay.

Double check all the settings (BlueDV and the channel on your RT3S, like to be in simplex, ColorCode, etc).

Nothing has changed in this area.

Daniel thank you very much for your reply and your time. I will go through all the settings.