Baofeng DM-1701 no comunication pc w10.
Posted: Wed Mar 27, 2024 8:25 pm
Hello.
I have purchased a Baofeng DM1701, when I connect it to my PC, which is Windows 10, it detects it as a sound device whether I turn it on in normal mode or if I turn it on in DFU mode. I have read that Windows 10 has problems when interpreting this walkie.
The problem is that neither opengd77 nor cps DM1701 v1.05 detect the correct port and I cannot configure the walkie to use it.
I have read all the posts about it, I have tried to install all the drivers on the web for this problem without success. The cable seems correct, I bought it for that model, but I cannot check if the pins are correct since I do not have a connection diagram for reference. I just need to try another cable or change the walkie for another one.
what dou you recommend?
Thank you very much in advance. I don't know what to do, I find myself without alternatives for the PC to recognize it.
I have purchased a Baofeng DM1701, when I connect it to my PC, which is Windows 10, it detects it as a sound device whether I turn it on in normal mode or if I turn it on in DFU mode. I have read that Windows 10 has problems when interpreting this walkie.
The problem is that neither opengd77 nor cps DM1701 v1.05 detect the correct port and I cannot configure the walkie to use it.
I have read all the posts about it, I have tried to install all the drivers on the web for this problem without success. The cable seems correct, I bought it for that model, but I cannot check if the pins are correct since I do not have a connection diagram for reference. I just need to try another cable or change the walkie for another one.
what dou you recommend?
Thank you very much in advance. I don't know what to do, I find myself without alternatives for the PC to recognize it.