Hi,
I have been reading the user's guide and so far no joy. So here is my question:
Is there a key stroke sequence to allow inversion of the input and output frequencies for testing etc.?
I know many HTs have this feature and was wondering if it was implemented in the Open firmware?
No biggie if not I will program an inverted channel. But was curious (I only have access to one DMR repeater here).
73s Dave
Can you switch input output freqs.?
Re: Can you switch input output freqs.?
Long press on '#' on a channel reverse TX and RX frequencies , note that it's globalK9FZJ wrote: ↑Mon May 06, 2024 1:56 pmHi,
I have been reading the user's guide and so far no joy. So here is my question:
Is there a key stroke sequence to allow inversion of the input and output frequencies for testing etc.?
I know many HTs have this feature and was wondering if it was implemented in the Open firmware?
No biggie if not I will program an inverted channel. But was curious (I only have access to one DMR repeater here).
73s Dave
https://github.com/LibreDMR/OpenGD77_Us ... -operation
Re: Can you switch input output freqs.?
Thanks Lars! I knew somebody would know!!!
73s Dave
73s Dave