-
VK3KYY
- Posts: 7839
- Joined: Sat Nov 16, 2019 3:25 am
- Location: Melbourne, Australia
Post
by VK3KYY » Thu Feb 08, 2024 8:55 pm
oh2fhj wrote: ↑Thu Feb 08, 2024 3:23 pm
Tomorrow works for me too, noo pressure.
I made a quick video comparing 2m and 70cm sensitivity, and at least in my ear its the same. Off course the 70 cm has more loss in the sort cable run and and the meter was calibrated in 02 so there might be a fraction off a difference, also just by ear so it's not possible to tell exact db fraction like if you hock up audio feedback to the meter.
http://kride.dy.fi:83/mesurments/sensit ... d_70cm.mp4
See
viewtopic.php?f=28&t=3760
Note.
I have not been able to load this version onto my radio yet, because its currently dissassembled, because I'm trying to capture the internal data on the I2C bus between the MCU and the TRx chips, while running the official firmware
-
F1RMB
- Posts: 2815
- Joined: Sat Nov 16, 2019 5:42 am
- Location: Grenoble, France
Post
by F1RMB » Fri Feb 09, 2024 2:59 pm
The DTMF bug while in Satellite is fixed. Thanks for the ones that reported that one.
Cheers.
---
Daniel
-
eb4adc
- Posts: 13
- Joined: Mon Nov 08, 2021 11:02 pm
Post
by eb4adc » Fri Feb 09, 2024 10:57 pm
Thans for all your work on this firmw. If you need help don´t dude asking us. We´ll made all we could...
-
mw1coe
- Posts: 7
- Joined: Mon Dec 09, 2019 2:43 am
Post
by mw1coe » Sun Feb 11, 2024 8:08 pm
As Anyone Else Experienced the Issue in although @ 1 time I was able to Program the Radio and the Drivers worked, The next time around the PC Gives error messages about Device has malfunctioned or the Drivers wont load and I get the Exclaimation Mark !! ?
I have tried this on WIN 7 and WIN 10 with the Same issues.
Tried updating drivers multiple time but it still throws up errors..
I'm just not to sure where to go from here..
Thanks
Rob..
-
VK3KYY
- Posts: 7839
- Joined: Sat Nov 16, 2019 3:25 am
- Location: Melbourne, Australia
Post
by VK3KYY » Sun Feb 11, 2024 8:45 pm
mw1coe wrote: ↑Sun Feb 11, 2024 8:08 pm
As Anyone Else Experienced the Issue in although @ 1 time I was able to Program the Radio and the Drivers worked, The next time around the PC Gives error messages about Device has malfunctioned or the Drivers wont load and I get the Exclaimation Mark !! ?
I have tried this on WIN 7 and WIN 10 with the Same issues.
Tried updating drivers multiple time but it still throws up errors..
I'm just not to sure where to go from here..
Thanks
Rob..
I have one PC where the DFU driver constantly malfunctions. I could not work out why. All my other PCs work fine
-
SO9W
- Posts: 1
- Joined: Mon Feb 12, 2024 10:18 am
Post
by SO9W » Wed Feb 14, 2024 8:25 am
Thank you for this excellent work. I'm testing firmware on MD2017 and it works fine. Usability of interface is great.
