Info and User power settings

[OM8AMV]

what is Info in display settings ?

[VK3KYY]

what is Info in display settings ?

viewtopic.php?f=13&t=1059&start=380

[OM8AMV]

i see only user power, not info in display settings. I set TS, power and starstop and no change on display

[VK3KYY]

i see only user power, not info in display settings. I set TS, power and starstop and no change on display

User power is in Options, because its a control of the way the radio operates.
Info is in Display options, because its is associated with the display.

It clearly says in this post that Info is in Display Options

viewtopic.php?f=13&t=1059&start=380

And it also clearly says in this post that the User Power is in Options

viewtopic.php?f=13&t=1059&start=430#p12274

[OM8AMV]

i set in display options power, nothing change on display, see TS, nothing, and set startstop and nothing.

[F1RMB]

Hi,

• Info: TS
  the 'TS' notification uses the bold font when a manual override is set ('*' keyboard key)
  the 'TS' notification changes to 'cS' if the current selected contact has a TS override.
• Info: Pwr
  The power notification use the bold font is the current channel has a power level setting.
• Info: Both
  I let you imagine

Cheers.
---
Daniel

[OM8AMV]

i cannot see any info, its a not usable feature, but again is problem when PTT 2 3 times, radio beep and completly open squelch. This bug has been at 2 months e.g

[F1RMB]

i cannot see any info, its a not usable feature, but again is problem when PTT 2 3 times, radio beep and completly open squelch. This bug has been at 2 months e.g

Maybe you need to read the manual to understand the TS override then.
Also, do you understand such incomplete bug report is useless at most ?

[OM8AMV]

i tx with 50mw - 3W, all ok, when transmit 4 and 5W, radio beep and completly opened squelch, on FM and DMR is noise.

[F1RMB]

i tx with 50mw - 3W, all ok, when transmit 4 and 5W, radio beep and completly opened squelch, on FM and DMR is noise.

we never had such report. I just tried, and I can't reproduce.
I don't see any reason why the GD can beep.
You also forgot to tell the RX/TX frequencies.

EDIT: and the firmware version (date and hash).