DMR TG in CPS

[OM8AMV]

I sent codeplug. I want to enter DMR1 with contact 1, DMR2 with contact 2, but DMR 1 and DMR 2 with contact 1, ie no change. So I want it as an analogous that everyone me ctcss, not the same.

[F1RMB]

I sent codeplug. I want to enter DMR1 with contact 1, DMR2 with contact 2, but DMR 1 and DMR 2 with contact 1, ie no change. So I want it as an analogous that everyone me ctcss, not the same.

As you wanted, OM0ODK-SVK uses KOSICE contact and OM0ODP-SVK uses SLOVAKIA contact.

GD-77_screengrab-2021-03-15_09_54_04.png (1.26 KiB) Viewed 1558 times

GD-77_screengrab-2021-03-15_09_53_54.png (1.21 KiB) Viewed 1558 times

Question: are you sure you didn't manually overrode the contact on your GD (a frame surrounding the contact name) ?



Cheers.
---
Daniel

[OM8AMV]

i set in cps contacts and in radio is no change. What you mean manual overrode ?

[F1RMB]

i set in cps contacts and in radio is no change. What you mean manual overrode ?

I mean that:
https://github.com/rogerclarkmelbourne/ ... mber-entry

When a TG has been manually entered, the display shows a 1 pixel box around the TG display area to indicate that this TG has been manually entered, even if the Contact / TG name is displayed rather than the TG number.

And it's also true if you pressed the SK2 button while receiving any other TG, on any other channel.


The pictures I sent in my previous post were made with a GD-77 using your codeplug.


Cheers.
---
Daniel