Re: Linux and Python CPS transfer program
Posted: Mon Aug 23, 2021 5:09 pm
Also make sure that the cable is fully plugged in. I know that sounds obvious but some radios need a very hard push to fully engage the connectors.
Amateur radio firmware for the GD-77, GD-77S, DM-1801, DM-1801A, RD-5R, MD-9600/RT-90, MD-UV380/RT-3S, DM-1701/RT-84 and MD2017/RT-82 radios
https://www.opengd77.com/
Okay, so it's the right cable, definitely.pnspotts wrote: ↑Mon Aug 23, 2021 4:27 pmThank you, Daniel. Very interesting. The cable I'm using came with the GD-77 and has Radioddity on the USB connector housing. Did they include the wrong Radioddity model's cable in the box? The cable works on a spare laptop (Windows 10) I used to set up my code plug and update it as I try to puzzle through this issue with Linux and the Python script. Is there a solution to this? If not, life and building code plugs for my OpenGD77 will go on, just without a Linux solution, at least for now.
With best regards,
Pete
P.S. Just saw the edit at the bottom of your most recent post. I'll take a look. Buy a replacement cable from Kenwood if needed? Thanks again!