Anysecu DM-UV-450 - It should be a rebranded MD-UV380

[SA0BUX]

I tried the "seller's dfu driver" st3.03 didn't work
Then i tried the 3.06 i got of the forum ... worked

I got the seller CPE to load the data from the radio under WIN10.
I also made a CTRL+T , and saved the "Caldata"

Strange when reading via the TYT CPE it crached once , and else when reading , i have to press OK ... I even think twice.

Well W10 is talking to the radio now.

Also read the CPE from linux , using the latest "GO" CPE from above.

The Old DFU 3.0.3 driver is probably meant for Windows XP or some other old Windows release.
I had serious problems in my Windows 10 computer with the original CPS and outdated drivers from Retevis/TYT/Baofeng earlier when I started to
use these radios (RT82&RT84 was my first DMR radios) but the 3.0.6 has a driver compiled for Windows 10 which has been very stable for me.

[OZ1FTG]

Well I took the GD77 path ....
Started the GD77 Win CPE , following Rodger's video
Selected Extras - MD-UV380
Selected the "donor fw"
Selected the GD77 - MD-380UV zipfile
Expected to have to confirm ... But nope .. It uploaded right away

Well now i have a white screen saying "Settings Updated"

That's where i am now.

[SA0BUX]

Well I took the GD77 path ....
Started the GD77 Win CPE , following Rodger's video
Selected Extras - MD-UV380
Selected the "donor fw"
Selected the GD77 - MD-380UV zipfile
Expected to have to confirm ... But nope .. It uploaded right away

Well now i have a white screen saying "Settings Updated"

That's where i am now.

Press the Green button.

[OZ1FTG]

Thanx ...
I'm Reading out the flash right now (Rodgers video)

Flash read & saved

Extras --> Calibration read & saved

Green button pressed - I now have a white screen showing

FM APRS 1W 100%

RA 144.0000
TA 144.0000


Btw:
Is the Flash Readout BIN file actually a Zip/compressed file" ???
When i try to "7-zip" it , it asks if i want to extract the data ....
That's usually just when the file is already contains a "known" "zip" header


Can i somehow export my - Old MD-UV380 "Original FW" CP , and import it in the new GD77 CP Edior ??

[F1RMB]

Nope, the bin is uncompressed, you can use ghex to read it.

Now you need to make a new codeplug using the OpenGD77 CPS and flash it.

[OZ1FTG]

Nope, the bin is uncompressed, you can use ghex to read it.

I'm more of a bless guy - And meld for diff
Is ghex cool ??

Now you need to make a new codeplug using the OpenGD77 CPS and flash it.

Can i import my old CP ... Maybe in CSV or ??

I have even printed the 100 pg UserGuide ... Guess i have some reading to do ... But that has to be l8ter
Who needs to RTFM 10.sec after a new install

[F1RMB]

Well, bless has some rendering problem here, so I switched to ghex, and it works fine for me.

About the CSV export/import, you might need to edit the exported data to make it OpenGD77 compliant (create a small codeplug in the OpenGD77 CPS, export it, you will get a bunch of files, fill it with your data).

[OZ1FTG]

About the CSV export/import, you might need to edit the exported data to make it OpenGD77 compliant (create a small codeplug in the OpenGD77 CPS, export it, you will get a bunch of files, fill it with your data).

Yucckkk .....
My old CP has a lot of data ...
Well i prob ever used 0.1% of it ....

We should have a Subsection for nice CP's ... Ie for DK

Dooh ... It's already there ... Just no DK codeplug yet ...
viewforum.php?f=14


Well Gent's
Thank you for your support, and i guess you can add Anysecu DM-UV450 to the "MD-UV380" supported list.

.

[OZ1FTG]

Beginner DMR woes and OOpzes
I have now heard my first BM parrot call.
Worked a lot better when remembering to disconnect the programming cable.
.