Amateur radio firmware for the GD-77, GD-77S, DM-1801, DM-1801A, RD-5R, MD-9600/RT-90, MD-UV380/RT-3S, DM-1701/RT-84 and MD2017/RT-82 radios
https://www.opengd77.com/
VK3KYY wrote: ↑Tue Feb 20, 2024 8:19 pmHotspot could be enabled in the RD5R code, but the USB connection would randomly disconnect when you tried to use the radio in hotspot mode
You would need to modify the internal electronics to add better RF suppression onto the USB and other internal connections, otherwise it will constantly have problems with the USB disconnecting when the radio transmits
Buy a hotspot or another radio
What software or application is needed to edit the source code so that it can output the firmware and load it onto the radio I don't change the code, but it's worth itVK3KYY wrote: ↑Tue Feb 20, 2024 8:19 pmHotspot could be enabled in the RD5R code, but the USB connection would randomly disconnect when you tried to use the radio in hotspot mode
You would need to modify the internal electronics to add better RF suppression onto the USB and other internal connections, otherwise it will constantly have problems with the USB disconnecting when the radio transmits
Buy a hotspot or another radio
Thank you, good wishes to youF1RMB wrote: ↑Tue Feb 20, 2024 7:29 pmIt's available in the following forum section:
viewtopic.php?f=13&t=3636
Beware, hotspot (modem) mode is not supported on the RD-5R, because of hardware limitation.
I guess I'll just buy a hot circuit. Thank you.F1RMB wrote: ↑Tue Feb 20, 2024 7:29 pmIt's available in the following forum section:
viewtopic.php?f=13&t=3636
Beware, hotspot (modem) mode is not supported on the RD-5R, because of hardware limitation.