I just installed the 1/18 update, which (on 4.1.0 RC7) is announced to support the MMDVM Display updates to the GD77 screen (including IP address while the hotspot is idle).
I don't think I've got it configured properly, so corrections and examples would be appreciated.
Doing it wrong has hung up the hotspot after multiple retry attempts.
I now have it configured (Under MMDVMHost Configuration):
MMDVM Displ;ay Type OLED Port: /dev/ttyUSB0 Nextion Layout G4KLX
And, Configuration/Expert/MMDVMHost/OLED section:
Cast configured to 1.
Any other changed needed?
Marc KD2LH
Configuration of MMDVM Display in CAST mode
Re: Configuration of MMDVM Display in CAST mode
No, you should put CAST as display driver only (you should edit in configuration > Expert).kd2lh wrote: ↑Sun Jan 19, 2020 2:22 pmI just installed the 1/18 update, which (on 4.1.0 RC7) is announced to support the MMDVM Display updates to the GD77 screen (including IP address while the hotspot is idle).
I don't think I've got it configured properly, so corrections and examples would be appreciated.
Doing it wrong has hung up the hotspot after multiple retry attempts.
I now have it configured (Under MMDVMHost Configuration):
MMDVM Displ;ay Type OLED Port: /dev/ttyUSB0 Nextion Layout G4KLX
And, Configuration/Expert/MMDVMHost/OLED section:
Cast configured to 1.
Any other changed needed?
Marc KD2LH
BTW, OLED Cast entry is a relic, its support has been dropped from MMDVMHost, as its code has been extracted and used to be the CAST display driver.
Cheers
Re: Configuration of MMDVM Display in CAST mode
With comprehension and a bit of experimentation things work so much better.
Thanks for the clarification!
Up and running all day without problems.
Thanks for the clarification!
Up and running all day without problems.