Funziona perfettamente !!!
grazie
ciao Roger
sorry Roger enabling the monitor in DMR would I listen to any CC on that frequency or does the CC scan activate? now i can't prove it i'm taking a walk by the seaVK3KYY wrote: ↑Fri Oct 09, 2020 7:30 amNot really a development version...
But I've created an experimental version which has a form of Monitor Mode by holding SK2 (Blue button on the GD77)
The firmware can be downloaded from this Google drive folder
https://drive.google.com/drive/folders/ ... sp=sharing
You need to hold SK2 for 2 seconds to activate monitor mode, and pressing any other button while SK2 has been held down, will turn off Monitor mode again.
It works for DMR and FM but currently the radio does not switch to FM mode if in DMR mode and no DMR signal is detected.
This will take a bit more thought and a lot more programming, but I'm sure its possible.
There is a chance that the radio ends up in monitor mode, and if it does this, especially on DMR, you'll need to go into the Quick menu (orange button) and re-enable the TS and CC filters
On FM just turning the radio off and on again, should probably clear it.