Latest developement release (2020.10.27) VFO issue

Post Reply
KI5GZK
Posts: 129
Joined: Sat Apr 11, 2020 6:27 pm

Latest developement release (2020.10.27) VFO issue

Post by KI5GZK » Thu Oct 29, 2020 2:33 am

The VFO in DMR mode is not working correctly when configured with TG List set to "None", but does have a Contact selected.

Here is an example:

Channel 1 is configured with TG List = BrandMeister
Channel 2 is configured with TG List = TGIF
The VFO is initially working as expected.
If I switch to channel 1 and then switch to VFO, the VFO is now using the BrandMeister TG List.
If I switch to channel 2 and then switch to VFO, the VFO is now using the TGIF TG List.

VK3KYY
Posts: 7437
Joined: Sat Nov 16, 2019 3:25 am
Location: Melbourne, Australia

Re: Latest developement release (2020.10.27) VFO issue

Post by VK3KYY » Thu Oct 29, 2020 5:21 am

KI5GZK wrote:
Thu Oct 29, 2020 2:33 am
The VFO in DMR mode is not working correctly when configured with TG List set to "None", but does have a Contact selected.

Here is an example:

Channel 1 is configured with TG List = BrandMeister
Channel 2 is configured with TG List = TGIF
The VFO is initially working as expected.
If I switch to channel 1 and then switch to VFO, the VFO is now using the BrandMeister TG List.
If I switch to channel 2 and then switch to VFO, the VFO is now using the TGIF TG List.
OK.

I'll add it to the bug list on Github

https://github.com/rogerclarkmelbourne/ ... issues/838

KI5GZK
Posts: 129
Joined: Sat Apr 11, 2020 6:27 pm

Re: Latest developement release (2020.10.27) VFO issue

Post by KI5GZK » Thu Oct 29, 2020 5:37 pm

I have tested the 2020.10.29 development release and have confirmed that this issue has been fixed.

Thank you!

VK3KYY
Posts: 7437
Joined: Sat Nov 16, 2019 3:25 am
Location: Melbourne, Australia

Re: Latest developement release (2020.10.27) VFO issue

Post by VK3KYY » Thu Oct 29, 2020 7:31 pm

OK.

Post Reply