New ongoing "Development" version has been created

Locked
IW2FHM
Posts: 17
Joined: Tue Nov 19, 2019 4:30 pm

Re: New ongoing "Development" version has been created

Post by IW2FHM » Tue Dec 22, 2020 1:11 pm

Hi Daniel,
Sorry was my error. The file of voice prompt by dounload was corrupted.
Tanks again.
Merry Cristmas and 73
Roberto

VK3KYY
Posts: 7478
Joined: Sat Nov 16, 2019 3:25 am
Location: Melbourne, Australia

Re: New ongoing "Development" version has been created

Post by VK3KYY » Tue Dec 22, 2020 7:43 pm

The last 2 Beta releases need the latest voice prompts file.

If the radio still contains the old file , the Voice option will not be shown, as it would not work

KI5GZK
Posts: 129
Joined: Sat Apr 11, 2020 6:27 pm

Re: New ongoing "Development" version has been created

Post by KI5GZK » Thu Dec 24, 2020 4:58 pm

I noticed a minor issue when scanning channels in a zone using the latest development version. This does not appear to be an issue when frequency scanning in VFO mode.

When long pressing the up arrow key to start scanning, if you release it just about the exact time or very slightly before you hear the beep, the squelch will be open while scanning and will stay open when scanning is stopped. At this point, manually changing the channel will result in the squelch resuming normal operation.

Holding the arrow key slightly longer will avoid the issue.

Apparently I have a knack for inadvertently triggering this issue, because it seems to happen fairly often to me. :D

User avatar
F1RMB
Posts: 2517
Joined: Sat Nov 16, 2019 5:42 am
Location: Grenoble, France

Re: New ongoing "Development" version has been created

Post by F1RMB » Thu Dec 24, 2020 6:20 pm

Hi,
KI5GZK wrote:
Thu Dec 24, 2020 4:58 pm
I noticed a minor issue when scanning channels in a zone using the latest development version. This does not appear to be an issue when frequency scanning in VFO mode.

When long pressing the up arrow key to start scanning, if you release it just about the exact time or very slightly before you hear the beep, the squelch will be open while scanning and will stay open when scanning is stopped. At this point, manually changing the channel will result in the squelch resuming normal operation.

Holding the arrow key slightly longer will avoid the issue.

Apparently I have a knack for inadvertently triggering this issue, because it seems to happen fairly often to me. :D

Yeah, thanks for catching this.
That did happened to me, but I was unable to reproduce. Now, I can 😉


Cheers
---
Daniel

User avatar
F1RMB
Posts: 2517
Joined: Sat Nov 16, 2019 5:42 am
Location: Grenoble, France

Re: New ongoing "Development" version has been created

Post by F1RMB » Thu Dec 24, 2020 8:07 pm

Hi,

Thanks for the report, the fix will be part of the next development release.


Cheers.
---
Daniel

VK3KYY
Posts: 7478
Joined: Sat Nov 16, 2019 3:25 am
Location: Melbourne, Australia

Re: New ongoing "Development" version has been created

Post by VK3KYY » Thu Dec 24, 2020 11:36 pm

I tried to replicate this, but couldn't

However, Daniel has sent me a fix. So assuming the fix doesn't have any side effects... That version from Daniel will be the next release.

KI5GZK
Posts: 129
Joined: Sat Apr 11, 2020 6:27 pm

Re: New ongoing "Development" version has been created

Post by KI5GZK » Fri Dec 25, 2020 3:58 am

F1RMB wrote:
Thu Dec 24, 2020 8:07 pm
Hi,

Thanks for the report, the fix will be part of the next development release.


Cheers.
---
Daniel
I'm happy to help when I can.
Thanks for looking into this.

KI5GZK
Posts: 129
Joined: Sat Apr 11, 2020 6:27 pm

Re: New ongoing "Development" version has been created

Post by KI5GZK » Fri Dec 25, 2020 4:09 am

VK3KYY wrote:
Thu Dec 24, 2020 11:36 pm
I tried to replicate this, but couldn't

However, Daniel has sent me a fix. So assuming the fix doesn't have any side effects... That version from Daniel will be the next release.
Yeah, the timing has to be just right, but I am able to replicate the issue fairly easily.
The first handful of times I ran into this issue were purely accidental. It took me a while to figure out how trigger it.

I would be happy to test the fix if you would like.

User avatar
F1RMB
Posts: 2517
Joined: Sat Nov 16, 2019 5:42 am
Location: Grenoble, France

Re: New ongoing "Development" version has been created

Post by F1RMB » Fri Dec 25, 2020 6:15 am

Hi,
KI5GZK wrote:
Fri Dec 25, 2020 4:09 am
VK3KYY wrote:
Thu Dec 24, 2020 11:36 pm
I tried to replicate this, but couldn't

However, Daniel has sent me a fix. So assuming the fix doesn't have any side effects... That version from Daniel will be the next release.
Yeah, the timing has to be just right, but I am able to replicate the issue fairly easily.
The first handful of times I ran into this issue were purely accidental. It took me a while to figure out how trigger it.

I would be happy to test the fix if you would like.

Yes, release time is critical, but from what I've experienced, starting from an analog channel is important too.


Cheers.
---
Daniel

User avatar
f6fzo
Posts: 72
Joined: Sat Jan 04, 2020 7:28 am

Re: New ongoing "Development" version has been created

Post by f6fzo » Fri Dec 25, 2020 8:23 am

Joyeux noël ! :D

Locked