New ongoing "Development" version has been created
Re: New ongoing "Development" version has been created
Hi Daniel,
Sorry was my error. The file of voice prompt by dounload was corrupted.
Tanks again.
Merry Cristmas and 73
Roberto
Sorry was my error. The file of voice prompt by dounload was corrupted.
Tanks again.
Merry Cristmas and 73
Roberto
Re: New ongoing "Development" version has been created
The last 2 Beta releases need the latest voice prompts file.
If the radio still contains the old file , the Voice option will not be shown, as it would not work
If the radio still contains the old file , the Voice option will not be shown, as it would not work
Re: New ongoing "Development" version has been created
I noticed a minor issue when scanning channels in a zone using the latest development version. This does not appear to be an issue when frequency scanning in VFO mode.
When long pressing the up arrow key to start scanning, if you release it just about the exact time or very slightly before you hear the beep, the squelch will be open while scanning and will stay open when scanning is stopped. At this point, manually changing the channel will result in the squelch resuming normal operation.
Holding the arrow key slightly longer will avoid the issue.
Apparently I have a knack for inadvertently triggering this issue, because it seems to happen fairly often to me.
When long pressing the up arrow key to start scanning, if you release it just about the exact time or very slightly before you hear the beep, the squelch will be open while scanning and will stay open when scanning is stopped. At this point, manually changing the channel will result in the squelch resuming normal operation.
Holding the arrow key slightly longer will avoid the issue.
Apparently I have a knack for inadvertently triggering this issue, because it seems to happen fairly often to me.
Re: New ongoing "Development" version has been created
Hi,
Yeah, thanks for catching this.
That did happened to me, but I was unable to reproduce. Now, I can
Cheers
---
Daniel
KI5GZK wrote: ↑Thu Dec 24, 2020 4:58 pmI noticed a minor issue when scanning channels in a zone using the latest development version. This does not appear to be an issue when frequency scanning in VFO mode.
When long pressing the up arrow key to start scanning, if you release it just about the exact time or very slightly before you hear the beep, the squelch will be open while scanning and will stay open when scanning is stopped. At this point, manually changing the channel will result in the squelch resuming normal operation.
Holding the arrow key slightly longer will avoid the issue.
Apparently I have a knack for inadvertently triggering this issue, because it seems to happen fairly often to me.
Yeah, thanks for catching this.
That did happened to me, but I was unable to reproduce. Now, I can
Cheers
---
Daniel
Re: New ongoing "Development" version has been created
Hi,
Thanks for the report, the fix will be part of the next development release.
Cheers.
---
Daniel
Thanks for the report, the fix will be part of the next development release.
Cheers.
---
Daniel
Re: New ongoing "Development" version has been created
I tried to replicate this, but couldn't
However, Daniel has sent me a fix. So assuming the fix doesn't have any side effects... That version from Daniel will be the next release.
However, Daniel has sent me a fix. So assuming the fix doesn't have any side effects... That version from Daniel will be the next release.
Re: New ongoing "Development" version has been created
Yeah, the timing has to be just right, but I am able to replicate the issue fairly easily.
The first handful of times I ran into this issue were purely accidental. It took me a while to figure out how trigger it.
I would be happy to test the fix if you would like.
Re: New ongoing "Development" version has been created
Hi,
Yes, release time is critical, but from what I've experienced, starting from an analog channel is important too.
Cheers.
---
Daniel
KI5GZK wrote: ↑Fri Dec 25, 2020 4:09 amYeah, the timing has to be just right, but I am able to replicate the issue fairly easily.
The first handful of times I ran into this issue were purely accidental. It took me a while to figure out how trigger it.
I would be happy to test the fix if you would like.
Yes, release time is critical, but from what I've experienced, starting from an analog channel is important too.
Cheers.
---
Daniel
Re: New ongoing "Development" version has been created
Joyeux noël !