New ongoing "Development" version has been created

Locked
VK3KYY
Posts: 7478
Joined: Sat Nov 16, 2019 3:25 am
Location: Melbourne, Australia

Re: New ongoing "Development" version has been created

Post by VK3KYY » Thu Dec 31, 2020 12:39 am

F1RMB wrote:
Wed Dec 30, 2020 9:10 pm
OK1TE wrote:
Wed Dec 30, 2020 9:07 pm
CSS voice follow-on is back and I've noticed some other improvements, thank you again.

Just a detail. I don't know, how the Radio Information screen looks like, but according the voice prompts there are three pages (when arrowing through): battery Status, temperature and battery status again.
Does this correspond with the visual presentation?

Yes, the first battery is the one with voltage and percentage, the third one is battery voltage history.

Cheers.
---
Daniel
BTW. Its not practical to add voice to the battery history graph which is on the third / last screen.

VK3KYY
Posts: 7478
Joined: Sat Nov 16, 2019 3:25 am
Location: Melbourne, Australia

Re: New ongoing "Development" version has been created

Post by VK3KYY » Tue Jan 19, 2021 4:42 am

I've released a new Development version, which has a number of bug fixes.

For the full details see

https://github.com/rogerclarkmelbourne/ ... 1.01.19.01

There is also an update voice prompt file, however its not essential to update the voice prompts, as the existing prompts should work with this firmware version

https://github.com/LibreDMR/voice-promp ... 1.01.19.01

User avatar
m1dyp
Posts: 601
Joined: Sat Nov 16, 2019 8:03 am
Location: Hertfordshire, U.K.
Contact:

Re: New ongoing "Development" version has been created

Post by m1dyp » Tue Jan 19, 2021 5:51 am

thank you

VK3KYY
Posts: 7478
Joined: Sat Nov 16, 2019 3:25 am
Location: Melbourne, Australia

Re: New ongoing "Development" version has been created

Post by VK3KYY » Tue Jan 19, 2021 5:58 am

m1dyp wrote:
Tue Jan 19, 2021 5:51 am
thank you
OK.

Let me know if you see any new problems.

There are lots of small bug fixes and improvements, most of which won't be noticeable, unless you are using Voice Prompts a lot.
But sometimes even a small change can accidentally break something.

User avatar
Ik0nwg
Posts: 242
Joined: Sat Nov 16, 2019 7:23 am
Location: JN61VG
Contact:

Re: New ongoing "Development" version has been created

Post by Ik0nwg » Tue Jan 19, 2021 6:54 am

Thanks Daniel and Colin
ciao Roger

User avatar
f6fzo
Posts: 72
Joined: Sat Jan 04, 2020 7:28 am

Re: New ongoing "Development" version has been created

Post by f6fzo » Tue Jan 19, 2021 7:46 am

Bonjour et merci :mrgreen:

G7JIQ
Posts: 25
Joined: Tue Jan 19, 2021 10:47 am

Re: New ongoing "Development" version has been created

Post by G7JIQ » Tue Jan 19, 2021 11:07 am

All looks great with the latest updates and tweeks,
The squelch with, and with out RX CTCSS works 100%.
So far all menus and DMR are working ok.

EC7AJT
Posts: 33
Joined: Mon Jan 13, 2020 8:02 pm

Re: New ongoing "Development" version has been created

Post by EC7AJT » Tue Jan 19, 2021 5:40 pm

Hello everyone.

Only happens to my GD-77?.

I just updated and in memory mode, dmr channel, it remains in the same slot.

Channel 1 (slot 1)
Channel 2 (slot 2)

If I change memory channel 1 to memory channel 2, my gd-77 remains same slot.

if I change it through the "*" key, it changes slot

(TS filter is on).

Thanks
73 EC7AJT Juan

User avatar
F1RMB
Posts: 2518
Joined: Sat Nov 16, 2019 5:42 am
Location: Grenoble, France

Re: New ongoing "Development" version has been created

Post by F1RMB » Tue Jan 19, 2021 6:44 pm

Hi,
EC7AJT wrote:
Tue Jan 19, 2021 5:40 pm
Hello everyone.

Only happens to my GD-77?.

I just updated and in memory mode, dmr channel, it remains in the same slot.

Channel 1 (slot 1)
Channel 2 (slot 2)

If I change memory channel 1 to memory channel 2, my gd-77 remains same slot.

if I change it through the "*" key, it changes slot

(TS filter is on).

Thanks
73 EC7AJT Juan

Remove the TS override (long press '*').


Cheers.
---
Daniel

EC7AJT
Posts: 33
Joined: Mon Jan 13, 2020 8:02 pm

Re: New ongoing "Development" version has been created

Post by EC7AJT » Tue Jan 19, 2021 7:35 pm

F1RMB wrote:
Tue Jan 19, 2021 6:44 pm
Hi,
EC7AJT wrote:
Tue Jan 19, 2021 5:40 pm
Hello everyone.

Only happens to my GD-77?.

I just updated and in memory mode, dmr channel, it remains in the same slot.

Channel 1 (slot 1)
Channel 2 (slot 2)

If I change memory channel 1 to memory channel 2, my gd-77 remains same slot.

if I change it through the "*" key, it changes slot

(TS filter is on).

Thanks
73 EC7AJT Juan

Remove the TS override (long press '*').


Cheers.
---
Daniel
Yes, now It changes slot.

Thanks Daniel

Locked