CPS partial restores of Flash memory
CPS partial restores of Flash memory
Because people are failing to backup Flash and EEPROM memory after installing the firmware, and then getting the LOW BT VERSION error when they reinstall some versions of the official firmware.
I've had to update the CPS to allow these people to restore just the lower 64k of Flash memory, so that the Hardware Version data is restored.
See
https://github.com/rogerclarkmelbourne/ ... /R20200606
I've also had to upload my backups for the GD-77, DM-1801 and RD-5R to here.
https://github.com/rogerclarkmelbourne/ ... er/backups
Use the partial backups of "Flash_lower_64k" Not the full flash backup, as this will overwrite your individual calibration data
i.e
DM-1801 https://github.com/rogerclarkmelbourne/ ... er_64k.bin
GD-77 https://github.com/rogerclarkmelbourne/ ... er_64k.bin
RD-5R https://github.com/rogerclarkmelbourne/ ... er_64k.bin
But before you restore. Please backup your EEPROM and Flash and the MCU and save the files somewhere safe
I've had to update the CPS to allow these people to restore just the lower 64k of Flash memory, so that the Hardware Version data is restored.
See
https://github.com/rogerclarkmelbourne/ ... /R20200606
I've also had to upload my backups for the GD-77, DM-1801 and RD-5R to here.
https://github.com/rogerclarkmelbourne/ ... er/backups
Use the partial backups of "Flash_lower_64k" Not the full flash backup, as this will overwrite your individual calibration data
i.e
DM-1801 https://github.com/rogerclarkmelbourne/ ... er_64k.bin
GD-77 https://github.com/rogerclarkmelbourne/ ... er_64k.bin
RD-5R https://github.com/rogerclarkmelbourne/ ... er_64k.bin
But before you restore. Please backup your EEPROM and Flash and the MCU and save the files somewhere safe
Re: CPS partial restores of Flash memory
today wanted to try the file "Flash_lower_64k.bin file" to transfer with cps software
do I have to flash under eeprom restore or flash restore?
i think flash restore is correct or not?
do I have to flash under eeprom restore or flash restore?
i think flash restore is correct or not?
Re: CPS partial restores of Flash memory
Try restoring the flash first
If it still does not work then restore the EEPROM
If it still does not work then restore the EEPROM
Re: CPS partial restores of Flash memory
want to give feedback
everything worked (special thanks go to VK3KYY)
everything worked (special thanks go to VK3KYY)
Re: CPS partial restores of Flash memory
Excellent
Re: CPS partial restores of Flash memory
Roger, your links are all broken
Re: CPS partial restores of Flash memory
unfortunately, I have to report that the second device does not work
the message comes low bt version
It was about the language encryption that I urgently need for the security service
and why the encryption only works with version 2.1.9 and not with 2.2.5 is a mystery to me
getting the firmware 2.2.5 on the device is not a problem, but version 2.1.9 does not work on my other device
I think the problem can be found in the bootloader or mcu rom ??
the message comes low bt version
It was about the language encryption that I urgently need for the security service
and why the encryption only works with version 2.1.9 and not with 2.2.5 is a mystery to me
getting the firmware 2.2.5 on the device is not a problem, but version 2.1.9 does not work on my other device
I think the problem can be found in the bootloader or mcu rom ??
Re: CPS partial restores of Flash memory
Torax wrote: ↑Sun May 23, 2021 2:21 pmunfortunately, I have to report that the second device does not work
the message comes low bt version
It was about the language encryption that I urgently need for the security service
and why the encryption only works with version 2.1.9 and not with 2.2.5 is a mystery to me
getting the firmware 2.2.5 on the device is not a problem, but version 2.1.9 does not work on my other device
I think the problem can be found in the bootloader or mcu rom ??
I just had a look at the backup data taken from my radio, and it begins with this
Code: Select all
Offset(h) 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
00000000 42 46 3A 42 46 31 38 30 31 5F 56 32 2E 31 00 00 BF:BF1801_V2.1..
00000010 52 4F 4D 3A 57 32 35 51 31 36 2D 32 4D 42 00 00 ROM:W25Q16-2MB..
Download HXD
https://mh-nexus.de/en/hxd/
Open the flash backup file
Change that version text to
2.2 instead of 2.1
Save the file under a different name
Re:Install the opengd77
restore that updated file
Re-install the version 2.2.5 into the radio and see if that fixes it
BTW. This is precisely why the User Guide tells everyone to backup their Flash and EEPROM files after installing the OpenGD77 firmware
https://github.com/LibreDMR/OpenGD77_Us ... thing-else
Re: CPS partial restores of Flash memory
right at the beginning after the installation of open gd firmware i made a backup
I uploaded the backups (you can have a look at them if you want)
I'll try the thing with the hex editor (I have experience with hex editors
Backup DM 1801 :
https://www.upload.ee/files/13170857/Ba ... 1.zip.html
Zip File !!!!!
I uploaded the backups (you can have a look at them if you want)
I'll try the thing with the hex editor (I have experience with hex editors
Backup DM 1801 :
https://www.upload.ee/files/13170857/Ba ... 1.zip.html
Zip File !!!!!