ALPHA 2022-10-22-01
ALPHA 2022-10-22-01
A new Alpha version is now available
downloads/MDUV380/Firmware/97f4df95bc11 ... c1f1cbea12
This version fixes the following problems:
* Up / Down arrows now operate squelch and power in the correct direction
* 1750Hz tone can now be sent by holding SK2 during Tx, like on the GD77 etc.
* DTMF characters A,B,C & D can now be entered or sent using Up, SK1+Up, Down , and SK1+Down
* Charcter input cursor position for channel name on the Channel Details screen is now correct
* Channel and VFO scan will start when holding the Up key. i.e no need to hold and wait for the beep before releasing, simply holding down will start the scan
* Slight UI change to VFO Sweep scan.
Rotary control adjusts sweep center frequency.
SK2 + Rotary contorl adjusts step size / over sweep range
Up increases gain
Down decreases gain
SK2 + Up increases lower RSSI threshold
SK2 + Down decreases lower RSSI threshold
* Bug associacted with holding SK2 while changing the Rotary control, while in VFO Scan mode has been fixed.
* In Channel an VFO scan.
The Star ( * ) key is now use to mark a channel or frequency to be skipped duing the current scan
Pressing the Up arrow recommences the scan, if its paused on a busy frequency.
downloads/MDUV380/Firmware/97f4df95bc11 ... c1f1cbea12
This version fixes the following problems:
* Up / Down arrows now operate squelch and power in the correct direction
* 1750Hz tone can now be sent by holding SK2 during Tx, like on the GD77 etc.
* DTMF characters A,B,C & D can now be entered or sent using Up, SK1+Up, Down , and SK1+Down
* Charcter input cursor position for channel name on the Channel Details screen is now correct
* Channel and VFO scan will start when holding the Up key. i.e no need to hold and wait for the beep before releasing, simply holding down will start the scan
* Slight UI change to VFO Sweep scan.
Rotary control adjusts sweep center frequency.
SK2 + Rotary contorl adjusts step size / over sweep range
Up increases gain
Down decreases gain
SK2 + Up increases lower RSSI threshold
SK2 + Down decreases lower RSSI threshold
* Bug associacted with holding SK2 while changing the Rotary control, while in VFO Scan mode has been fixed.
* In Channel an VFO scan.
The Star ( * ) key is now use to mark a channel or frequency to be skipped duing the current scan
Pressing the Up arrow recommences the scan, if its paused on a busy frequency.
Re: ALPHA 2022-10-22-01
Hello, there is a problem with this firmware:
On Quick Menu (SK1+Green) is impossible to change values with rotary knob...... like TS Filter value from Off to On
Can you please check !
On Quick Menu (SK1+Green) is impossible to change values with rotary knob...... like TS Filter value from Off to On
Can you please check !
Re: ALPHA 2022-10-22-01
OK
This problem only seems to be on the Channel screen. The VFO appears Quick Menu appears to be OK
Re: ALPHA 2022-10-22-01
Not at present.
The code was originally written for radios with monochrome displays. As such it is not easy (or worth the considerable effort) to add colours just for one radio.
We may possibly make the foreground and background colours user selectable at a later date but his would still be just a two colour display.
The code was originally written for radios with monochrome displays. As such it is not easy (or worth the considerable effort) to add colours just for one radio.
We may possibly make the foreground and background colours user selectable at a later date but his would still be just a two colour display.
Re: ALPHA 2022-10-22-01
I confirm !!! There is such a problem as described above in the quote. Please fix.
Re: ALPHA 2022-10-22-01
Please be patient.
Don't forget that Roger is on the other side of the globe!
The reported problem will be fixed but people need to sleep sometimes!
Don't forget that Roger is on the other side of the globe!
The reported problem will be fixed but people need to sleep sometimes!
Re: ALPHA 2022-10-22-01
Big Thanks!VK3KYY wrote: ↑Sat Oct 22, 2022 9:14 pmA new Alpha version is now available
downloads/MDUV380/Firmware/97f4df95bc11 ... c1f1cbea12
This version fixes the following problems:
* Up / Down arrows now operate squelch and power in the correct direction
* 1750Hz tone can now be sent by holding SK2 during Tx, like on the GD77 etc.
* DTMF characters A,B,C & D can now be entered or sent using Up, SK1+Up, Down , and SK1+Down
* Charcter input cursor position for channel name on the Channel Details screen is now correct
* Channel and VFO scan will start when holding the Up key. i.e no need to hold and wait for the beep before releasing, simply holding down will start the scan
* Slight UI change to VFO Sweep scan.
Rotary control adjusts sweep center frequency.
SK2 + Rotary contorl adjusts step size / over sweep range
Up increases gain
Down decreases gain
SK2 + Up increases lower RSSI threshold
SK2 + Down decreases lower RSSI threshold
* Bug associacted with holding SK2 while changing the Rotary control, while in VFO Scan mode has been fixed.
* In Channel an VFO scan.
The Star ( * ) key is now use to mark a channel or frequency to be skipped duing the current scan
Pressing the Up arrow recommences the scan, if its paused on a busy frequency.
CU7AAZ
73s