ALPHA 2022-10-22-01

Locked
VK3KYY
Posts: 8143
Joined: Sat Nov 16, 2019 3:25 am
Location: Melbourne, Australia

ALPHA 2022-10-22-01

Post by VK3KYY » Sat Oct 22, 2022 9:14 pm

A new Alpha version is now available

downloads/MDUV380/Firmware/97f4df95bc11 ... c1f1cbea12

This version fixes the following problems:

* Up / Down arrows now operate squelch and power in the correct direction
* 1750Hz tone can now be sent by holding SK2 during Tx, like on the GD77 etc.
* DTMF characters A,B,C & D can now be entered or sent using Up, SK1+Up, Down , and SK1+Down
* Charcter input cursor position for channel name on the Channel Details screen is now correct
* Channel and VFO scan will start when holding the Up key. i.e no need to hold and wait for the beep before releasing, simply holding down will start the scan

* Slight UI change to VFO Sweep scan.
Rotary control adjusts sweep center frequency.
SK2 + Rotary contorl adjusts step size / over sweep range
Up increases gain
Down decreases gain
SK2 + Up increases lower RSSI threshold
SK2 + Down decreases lower RSSI threshold

* Bug associacted with holding SK2 while changing the Rotary control, while in VFO Scan mode has been fixed.
* In Channel an VFO scan.
The Star ( * ) key is now use to mark a channel or frequency to be skipped duing the current scan
Pressing the Up arrow recommences the scan, if its paused on a busy frequency.

F1RIV
Posts: 7
Joined: Tue Sep 20, 2022 3:46 pm

Re: ALPHA 2022-10-22-01

Post by F1RIV » Sun Oct 23, 2022 9:57 am

Thank you 73's

HB3XPL
Posts: 15
Joined: Sat Nov 16, 2019 9:15 am

Re: ALPHA 2022-10-22-01

Post by HB3XPL » Sun Oct 23, 2022 10:33 am

Hello, there is a problem with this firmware:

On Quick Menu (SK1+Green) is impossible to change values with rotary knob...... like TS Filter value from Off to On

Can you please check !

VK3KYY
Posts: 8143
Joined: Sat Nov 16, 2019 3:25 am
Location: Melbourne, Australia

Re: ALPHA 2022-10-22-01

Post by VK3KYY » Sun Oct 23, 2022 11:21 am

HB3XPL wrote:
Sun Oct 23, 2022 10:33 am
Hello, there is a problem with this firmware:

On Quick Menu (SK1+Green) is impossible to change values with rotary knob...... like TS Filter value from Off to On

Can you please check !
OK

This problem only seems to be on the Channel screen. The VFO appears Quick Menu appears to be OK

G4EML
Posts: 994
Joined: Sat Nov 16, 2019 10:01 am

Re: ALPHA 2022-10-22-01

Post by G4EML » Sun Oct 23, 2022 2:36 pm

Not at present.

The code was originally written for radios with monochrome displays. As such it is not easy (or worth the considerable effort) to add colours just for one radio.

We may possibly make the foreground and background colours user selectable at a later date but his would still be just a two colour display.

UR5TNF
Posts: 12
Joined: Sat Jun 18, 2022 7:43 am
Location: Ukraine

Re: ALPHA 2022-10-22-01

Post by UR5TNF » Sun Oct 23, 2022 3:46 pm

HB3XPL wrote:
Sun Oct 23, 2022 10:33 am
Hello, there is a problem with this firmware:

On Quick Menu (SK1+Green) is impossible to change values with rotary knob...... like TS Filter value from Off to On

Can you please check !
I confirm !!! There is such a problem as described above in the quote. Please fix.

G4EML
Posts: 994
Joined: Sat Nov 16, 2019 10:01 am

Re: ALPHA 2022-10-22-01

Post by G4EML » Sun Oct 23, 2022 4:45 pm

Please be patient.
Don't forget that Roger is on the other side of the globe!
The reported problem will be fixed but people need to sleep sometimes!

CU7AAZ
Posts: 77
Joined: Sat Mar 26, 2022 8:13 pm
Location: Azores

Re: ALPHA 2022-10-22-01

Post by CU7AAZ » Sun Oct 23, 2022 6:16 pm

VK3KYY wrote:
Sat Oct 22, 2022 9:14 pm
A new Alpha version is now available

downloads/MDUV380/Firmware/97f4df95bc11 ... c1f1cbea12

This version fixes the following problems:

* Up / Down arrows now operate squelch and power in the correct direction
* 1750Hz tone can now be sent by holding SK2 during Tx, like on the GD77 etc.
* DTMF characters A,B,C & D can now be entered or sent using Up, SK1+Up, Down , and SK1+Down
* Charcter input cursor position for channel name on the Channel Details screen is now correct
* Channel and VFO scan will start when holding the Up key. i.e no need to hold and wait for the beep before releasing, simply holding down will start the scan

* Slight UI change to VFO Sweep scan.
Rotary control adjusts sweep center frequency.
SK2 + Rotary contorl adjusts step size / over sweep range
Up increases gain
Down decreases gain
SK2 + Up increases lower RSSI threshold
SK2 + Down decreases lower RSSI threshold

* Bug associacted with holding SK2 while changing the Rotary control, while in VFO Scan mode has been fixed.
* In Channel an VFO scan.
The Star ( * ) key is now use to mark a channel or frequency to be skipped duing the current scan
Pressing the Up arrow recommences the scan, if its paused on a busy frequency.
Big Thanks!
CU7AAZ
73s

VK3KYY
Posts: 8143
Joined: Sat Nov 16, 2019 3:25 am
Location: Melbourne, Australia

Re: ALPHA 2022-10-22-01

Post by VK3KYY » Sun Oct 23, 2022 10:23 pm

New alpha is now available which fixes the QuickMenu bug

viewtopic.php?f=19&t=2452

Locked