LED in the microphone
LED in the microphone
Hello.
Is it possible to make the led in the microphone work like in the MD-760 radio? It is red when transmitting but not when receiving.
Regards
Matt
Is it possible to make the led in the microphone work like in the MD-760 radio? It is red when transmitting but not when receiving.
Regards
Matt
Re: LED in the microphone
Lo ideal sería que en algún lugar del frente del TYT 9600 se coloque un diodo bicolor para indicar recepción y transmisión como existe en el handy Radioditty GD77.
Re: LED in the microphone
The MD9600 has no software controllable LED indicators.
The Microphone LED is directly controlled by the PTT switch.
Colin G4EML
The Microphone LED is directly controlled by the PTT switch.
Colin G4EML
Re: LED in the microphone
En el item "opciones de pantalla" del OPEN GD77 se explica como controlar el LED bicolor, creo que si se pudiera colocar de alguna forma mecánica en el frente del TYT 9600 ese led podría tenerse un testigo.
Re: LED in the microphone
Hi.
Looking at the microphone diagram, there are two free pins in RJ45. You can take the signal from the squelch transistor and change the LED to green/red.