inputting lat long pos issue
inputting lat long pos issue
im trying to add my lat long pos manually into my rt3s non gps and im struggling as my pos is listed as
52.94## and -1.26## trying to figure out how to add the negitive value to it, is their a way to do it via cps or is it radio only
tia
52.94## and -1.26## trying to figure out how to add the negitive value to it, is their a way to do it via cps or is it radio only
tia
Re: inputting lat long pos issue
Hi,
N vs S, E vs W
Cheers.
---
Daniel
N vs S, E vs W
Cheers.
---
Daniel
Re: inputting lat long pos issue
confused a little with that response ik i can change the first strig to north or southe but the second one i cant or im doing something wrong my full pos is
not quite shure how i go about inputting that
(edited to remove info)
Last edited by 2E0IQZ on Sat May 06, 2023 2:41 am, edited 1 time in total.
Re: inputting lat long pos issue
There is no negative value, minus are South or West
https://github.com/LibreDMR/OpenGD77_Us ... ion-screen
Cheers.
---
Daniel
https://github.com/LibreDMR/OpenGD77_Us ... ion-screen
Cheers.
---
Daniel
Re: inputting lat long pos issue
keeps saying im in grid IO92kn when my actual grid is IO92iw close enough ig ty for helpF1RMB wrote: ↑Sat May 06, 2023 2:23 amThere is no negative value, minus are South or West
https://github.com/LibreDMR/OpenGD77_Us ... ion-screen
Cheers.
---
Daniel
Re: inputting lat long pos issue
Well, send me an email (available on qrz.com) with your coordinates, I will check the convertion.M7RDN wrote: ↑Sat May 06, 2023 2:39 amkeeps saying im in grid IO92kn when my actual grid is IO92iw close enough ig ty for helpF1RMB wrote: ↑Sat May 06, 2023 2:23 amThere is no negative value, minus are South or West
https://github.com/LibreDMR/OpenGD77_Us ... ion-screen
Cheers.
---
Daniel
Cheers.
---
Daniel
Re: inputting lat long pos issue
Tried you QRZ coordinates on a DM-1701 and got IO92IW
You need to enter add zeros before the 1 i.e. 001.xxxx and then use SK2 + Up/Down arrow to change to W
You need to enter add zeros before the 1 i.e. 001.xxxx and then use SK2 + Up/Down arrow to change to W