Automatic resume of scanning in DW

Discussions related to the firmware code development
Post Reply
EU1AEQ
Posts: 149
Joined: Sat Jan 30, 2021 7:25 pm

Automatic resume of scanning in DW

Post by EU1AEQ » Wed May 24, 2023 6:16 am

Is it possible to automatically resume tracking of both channels in VFO mode after the PTT button has been pressed?
That is, after the activity appeared on the channel and the QSO took place, the scanning continues automatically.
This mode can also be useful when scanning channels. This would be convenient when using a headset.

I hope the translation turned out to be more or less clear))))

User avatar
F1RMB
Posts: 2765
Joined: Sat Nov 16, 2019 5:42 am
Location: Grenoble, France

Re: Automatic resume of scanning in DW

Post by F1RMB » Wed May 24, 2023 6:32 am

Hi,

No, any button press stops the scanning, in any mode.


Cheers.
---
Daniel

EU1AEQ
Posts: 149
Joined: Sat Jan 30, 2021 7:25 pm

Re: Automatic resume of scanning in DW

Post by EU1AEQ » Thu May 25, 2023 6:26 am

F1RMB wrote:
Wed May 24, 2023 6:32 am

No, any button press stops the scanning, in any mode.
I was interested in the possibility of implementing such a function. I know how it works now.

Post Reply