New Beta 2024 05 11
New Beta 2024 05 11
A new Beta version if now available
downloads/MDUV380_DM1701/Firmware/Latest
downloads/MDUV380_DM1701/Firmware/75772 ... 295861fdc2
This version has the following changes
* Fixes problem with satellite APRS frequencies
* Fixes volume control problems
* Adds Safe Boot mode (SK1 + 0) to be used when the radio will not bootup or bootloops.
* Fixes incorrect power level display on 10W radio versions
* Updates translations
* Fixes scan frequencies range boundary display problem
* Fixes voice prompt problem when replaying a prompt
* Fixes possible hanging problems associated with I2Cinternal bus contention
* Workaround for bugs in the C6000 DMR chip
All these changes were made by Daniel F1RMB, so thanks goes to him and the varoius translators and people who have reported bugs and helped Daniel test his fixes
downloads/MDUV380_DM1701/Firmware/Latest
downloads/MDUV380_DM1701/Firmware/75772 ... 295861fdc2
This version has the following changes
* Fixes problem with satellite APRS frequencies
* Fixes volume control problems
* Adds Safe Boot mode (SK1 + 0) to be used when the radio will not bootup or bootloops.
* Fixes incorrect power level display on 10W radio versions
* Updates translations
* Fixes scan frequencies range boundary display problem
* Fixes voice prompt problem when replaying a prompt
* Fixes possible hanging problems associated with I2Cinternal bus contention
* Workaround for bugs in the C6000 DMR chip
All these changes were made by Daniel F1RMB, so thanks goes to him and the varoius translators and people who have reported bugs and helped Daniel test his fixes
-
- Posts: 39
- Joined: Sat May 09, 2020 4:00 pm
Re: New Beta 2024 05 11
The black stripe error continues on the screen with a stable version, it does not happen version beta:
Last edited by Juan Francisco on Sat May 11, 2024 4:22 pm, edited 1 time in total.
Re: New Beta 2024 05 11
1) contextJuan Francisco wrote: ↑Sat May 11, 2024 3:55 pmThe black stripe error continues on the screen with a stable version, it does not happen
2) détails
3) a bit of politeness, you know like, hello, thenks, stuff like that...
Thanks.
---
-
- Posts: 39
- Joined: Sat May 09, 2020 4:00 pm
Re: New Beta 2024 05 11
Hello Note that the stable firmware version the screen completely covers the pixels but in the beta versions there is an uncovered strip with black pixels ... I don't know if it is an error to improve visibility ... thank you 73
baofen 1701
cpu tyt
stable version
baofen 1701
cpu tyt
stable version
Re: New Beta 2024 05 11
No context, no details, should I mention the rest ?.
From my guesses, you're using a DM-1701.
What you see is NOT a bug.
Flash the RT-84 image.
For you next posts, pay attention to the content of your messages (EDIT: I see you've just edited your last post).
Thanks.
From my guesses, you're using a DM-1701.
What you see is NOT a bug.
Flash the RT-84 image.
For you next posts, pay attention to the content of your messages (EDIT: I see you've just edited your last post).
Thanks.
-
- Posts: 39
- Joined: Sat May 09, 2020 4:00 pm
Re: New Beta 2024 05 11
I put the image of the 1701 in both cases (stable and beta) and that screen difference appears on the baofeng 1701 cpu tytF1RMB wrote: ↑Sat May 11, 2024 4:21 pmNo context, no details, should I mention the rest ?.
From my guesses, you're using a DM-1701.
What you see is NOT a bug.
Flash the RT-84 image.
For you next posts, pay attention to the content of your messages (EDIT: I see you've just edited your last post).
I thought there was some strange error... great work, no doubt about the firmware.
Thanks.
edit in the post and indicate radio baofeng 1701 thanks
Re: New Beta 2024 05 11
Yes, I noticed that, then edited mine.Juan Francisco wrote: ↑Sat May 11, 2024 4:24 pmedit in the post and indicate radio baofeng 1701 thanksF1RMB wrote: ↑Sat May 11, 2024 4:21 pmNo context, no details, should I mention the rest ?.
From my guesses, you're using a DM-1701.
What you see is NOT a bug.
Flash the RT-84 image.
For you next posts, pay attention to the content of your messages (EDIT: I see you've just edited your last post).
Thanks.
Still, flash the RT-84 image. Vast majority of the DM-1701 has a problem with the LCD panel/bezel position/overlap, so the 8 top lines are skipped to make the header more visible.
Since your DM-1701 don't suffer of this, use the RT-84 FW, as it uses the whole LCD panel (that's the only difference between the two firmware files).
Cheers.
---
Daniel
-
- Posts: 39
- Joined: Sat May 09, 2020 4:00 pm
Re: New Beta 2024 05 11
Thank you very much for the response, I am having problems loading the website and editing (sorry)
Re: New Beta 2024 05 11
Thank you. Great updates. Any way to make the 390 plus brighter? Very dim after updates. Thanks
Re: New Beta 2024 05 11
Hi,
With this version, at 100% the backlight don't use the PWM anymore, so it can't be brighter than that.
Cheers.
---
Daniel
With this version, at 100% the backlight don't use the PWM anymore, so it can't be brighter than that.
Cheers.
---
Daniel