RT3S GPS - keyboard stops responding built 20240908143155

OM2DEF
Posts: 7
Joined: Fri Sep 13, 2024 3:40 pm

RT3S GPS - keyboard stops responding built 20240908143155

Post by OM2DEF » Sat Sep 14, 2024 8:49 am

Hello developers,

From 1 to 5 seconds after power on the keyboard stops responding, and I can't do anything. The stock firmware works without problem. I tried to do everything like: different versions of OpenGD77, different OpenGD77 CPS, backup flash, restore falsh, mcu, whatever, double key combinations during power on, 2 days battery disconnect, 2 days on charger, back to stock firmware... Nothing works. When the radio boots up, the logo is showing only for 0.2 seconds - very quickly disapeared. It's unconventional. Maybe I have a new HW revision or HW issue. Stock firmware works very well, but is not as good as OpenGD77.

Some video:
https://www.facebook.com/reel/8262453930497775

OpenGD77
Built
20240908143155
[ 9947546 D ]
CPU:TYT
CPU Sig :0x0413
CPU Rev: 0x0009
CPU Pack: 0x0007
CPU Flash: 1024kb

SA0BUX
Posts: 717
Joined: Tue Jul 05, 2022 8:50 am
Location: JO99ah, Stockholm, Sweden
Contact:

Re: RT3S GPS - keyboard stops responding built 20240908143155

Post by SA0BUX » Sat Sep 14, 2024 9:06 am

OM2DEF wrote:
Sat Sep 14, 2024 8:49 am
Hello developers,

From 1 to 5 seconds after power on the keyboard stops responding, and I can't do anything. The stock firmware works without problem. I tried to do everything like: different versions of OpenGD77, different OpenGD77 CPS, backup flash, restore falsh, mcu, whatever, double key combinations during power on, 2 days battery disconnect, 2 days on charger, back to stock firmware... Nothing works. When the radio boots up, the logo is showing only for 0.2 seconds - very quickly disapeared. It's unconventional. Maybe I have a new HW revision or HW issue. Stock firmware works very well, but is not as good as OpenGD77.

Some video:
https://www.facebook.com/reel/8262453930497775

OpenGD77
Built
20240908143155
[ 9947546 D ]
CPU:TYT
CPU Sig :0x0413
CPU Rev: 0x0009
CPU Pack: 0x0007
CPU Flash: 1024kb
What's your serial number ?

In the video you say that you upgraded to latest opengd77, did you upgrade from some other opengd77 version or was it from stock firmware ?

OM2DEF
Posts: 7
Joined: Fri Sep 13, 2024 3:40 pm

Re: RT3S GPS - keyboard stops responding built 20240908143155

Post by OM2DEF » Sat Sep 14, 2024 1:13 pm

I attached the serial number. The first time I upgraded from stock firmware. Everything worked okay for about 4h until when the keyboard stopped working. After this moment, the keyboard stops every time immediately after powering on. I had a problem confirming the message "Settings Updated" for the first time. This problem is described on this forum. I use workflow with 2 days of power on connected to the charger. After 2 days power on I was able to confirm the message with the green button. But after 5 seconds in menu keyboard stops once again. It depends on how long the radio is switched off. If it switches off for more than a few minutes, the logo appears during power on procedure and I have cca 5 seconds to work with a keyboard. When the procedure power off/on is quick, the logo does not appear and the keyboard doesn't work immediately after the radio boots. It seems like some condenser is fully charged or not. But I don't know the HW of this radio.
Last edited by OM2DEF on Thu Oct 03, 2024 7:55 am, edited 1 time in total.

OM2DEF
Posts: 7
Joined: Fri Sep 13, 2024 3:40 pm

Re: RT3S GPS - keyboard stops responding built 20240908143155

Post by OM2DEF » Sat Sep 21, 2024 2:55 pm

One more note: The boot sequence is very fast with no logo or text, which means some initialization procedures are skipped...

G4EML
Posts: 997
Joined: Sat Nov 16, 2019 10:01 am

Re: RT3S GPS - keyboard stops responding built 20240908143155

Post by G4EML » Sat Sep 21, 2024 7:01 pm

Have you tried disconnecting and reconnecting the front panel cable? A bad connection could cause spurious keyboard signals.

OM2DEF
Posts: 7
Joined: Fri Sep 13, 2024 3:40 pm

Re: RT3S GPS - keyboard stops responding built 20240908143155

Post by OM2DEF » Thu Oct 03, 2024 7:55 am

Yes, I did it. As I wrote before, the keyboard works correctly under stock firmware. There is one issue I note. The radio boot very quickly. So I mean, some initialising process is skipped during the start.

VK3KYY
Posts: 8195
Joined: Sat Nov 16, 2019 3:25 am
Location: Melbourne, Australia

Re: RT3S GPS - keyboard stops responding built 20240908143155

Post by VK3KYY » Thu Oct 03, 2024 7:59 am

OM2DEF wrote:
Thu Oct 03, 2024 7:55 am
Yes, I did it. As I wrote before, the keyboard works correctly under stock firmware. There is one issue I note. The radio boot very quickly. So I mean, some initialising process is skipped during the start.
The OpenGD77 firmware will boot almost instantly if there is no boot melody e.g. boot melody = 0,0

User avatar
F1RMB
Posts: 2878
Joined: Sat Nov 16, 2019 5:42 am
Location: Grenoble, France

Re: RT3S GPS - keyboard stops responding built 20240908143155

Post by F1RMB » Thu Oct 03, 2024 10:49 am

Have you made a codeplug for your device, using the OpenGD77 CPS ?

OM2DEF
Posts: 7
Joined: Fri Sep 13, 2024 3:40 pm

Re: RT3S GPS - keyboard stops responding built 20240908143155

Post by OM2DEF » Sun Oct 20, 2024 8:13 am

VK3KYY wrote:
Thu Oct 03, 2024 7:59 am
OM2DEF wrote:
Thu Oct 03, 2024 7:55 am
Yes, I did it. As I wrote before, the keyboard works correctly under stock firmware. There is one issue I note. The radio boot very quickly. So I mean, some initialising process is skipped during the start.
The OpenGD77 firmware will boot almost instantly if there is no boot melody e.g. boot melody = 0,0
There is my boot melody = 38,6,0,2,38,2,0,2,38,6,0,2,38,2,0,2,38,6

OM2DEF
Posts: 7
Joined: Fri Sep 13, 2024 3:40 pm

Re: RT3S GPS - keyboard stops responding built 20240908143155

Post by OM2DEF » Sun Oct 20, 2024 8:15 am

F1RMB wrote:
Thu Oct 03, 2024 10:49 am
Have you made a codeplug for your device, using the OpenGD77 CPS ?
Yes, have.

Post Reply