I checked the code and it is not resetting the CC analysis histogram after you transmit.KU4ZD wrote: ↑Mon Mar 02, 2020 2:37 pmI am noticing that with the filter set to 'none', after I transmit the cc changes from the setting in the code plug to 0 and the net time I transmit it transmits on cc0. This happens on the hot and digital simplex. The result is that I am sending out the wrong cc. It does not happen if I have the filter set to CC. If the filter is set to CC all functions correctly. I confirmed the CC actually does change by going to a simplex frequency on another HT and testing.
Your radio must be receiving noise which its interpreting as a DMR signal on another CC.
I could possibly preload the histogram with a value to bias it towards the CC that is defined for the channel, but this would slow down the detection of other CC's and also in your case I doubt it would fix the problem.
Disabling the CC is not intended for normal operation