Release Candidate (2022 02 23)
Re: Release Candidate (2022 02 23)
Mine just starts scanning again. DMR being received is clear as day. As soon as transmission stops, my HT goes to FM mode and static, as soon as I let go, it starts scanning again
Re: Release Candidate (2022 02 23)
For sure you have to stop the scan.
Re: Release Candidate (2022 02 23)
had been reported in Release Candidate (2022 02 20): https://opengd77.com/viewtopic.php?f=13&t=2114666lord666 wrote: ↑Fri Feb 25, 2022 7:05 pm...
Can You kindly explain what happened with CC filter.
...
"* CC Filter option has been removed from the Quick Menu, because on some radios constantly scanning for the CC seems to cause problems with the C6000 DMR chip which results in the firmware crashing."
and there is more about CC Filter in this link above
73's de OE1MWW
Wolfgang
Re: Release Candidate (2022 02 23)
Thanks to Ik0nwg for finding and reporting a crash bug in this release
There will be another new release today with some fixes
There will be another new release today with some fixes
Re: Release Candidate (2022 02 23)
If you are scanning channels then you should always set the CC of the channel to the CC of the signal you wish to receive.666lord666 wrote: ↑Sat Feb 26, 2022 12:11 pmI have a lot of channels in scan list can it automatically scan CC too for each received transmission at any channel?
If you are saving that the same channel ( frequency ) has transmissions with different CC, then these are not Amateur Radio signals, and this firmware is for Amateur Radio use.
The reason for the CC scan in Monitor mode is for Amateur Radio operators who are perhaps on holiday in a new area, to find local repeaters.
Once the CC of the repeater has been scanned, mainly using the VFO, the VFO frequency can be used to create a new Channel for that repater.