Try on Eco mode 0CU7AAZ wrote: ↑Sun Oct 16, 2022 10:23 pmHi to All
Something is happening at the reception, I am 8 km away from a UHF repeater, without obstacles. RT3S connected to outdoor antenna. Normally I get maximum signal, full scale. With rssi of -106db. Before the rssi was -70db +/-. With the radio antenna I had no reception inside the house. I also notice the same with VHF repeaters near me
I tested it with another equipment and the signals are ok.
I don't know if it's the firmware or the hardware...
I don't know if anyone else is having the same problem
Thanks !!
73s
ALPHA 2022-10-16-01
Re: ALPHA 2022-10-16-01/ RX
Re: ALPHA 2022-10-16-01
The absence of sound at the incoming signal was noticed twice (the green LED was on).
1 case. The station was presumably in waiting. More precisely, I do not remember, the sound, it seems, was not in the DMR. Turning the valcoder left-right restored the sound. The event happened unexpectedly, I was not ready.
2 case. The station was in scan. There was no reception on FM. The backlight is in the "buttons" mode, pressing the Fn button turned on the screen, but the sound appeared only after manipulating the valcoder.
ECO=3 is used.In
1 case. The station was presumably in waiting. More precisely, I do not remember, the sound, it seems, was not in the DMR. Turning the valcoder left-right restored the sound. The event happened unexpectedly, I was not ready.
2 case. The station was in scan. There was no reception on FM. The backlight is in the "buttons" mode, pressing the Fn button turned on the screen, but the sound appeared only after manipulating the valcoder.
ECO=3 is used.In
Re: ALPHA 2022-10-16-01
What is a "valcoder"
Re: ALPHA 2022-10-16-01/ RX
I did the test in all ECO modeVK3KYY wrote: ↑Sun Oct 16, 2022 11:09 pmTry on Eco mode 0CU7AAZ wrote: ↑Sun Oct 16, 2022 10:23 pmHi to All
Something is happening at the reception, I am 8 km away from a UHF repeater, without obstacles. RT3S connected to outdoor antenna. Normally I get maximum signal, full scale. With rssi of -106db. Before the rssi was -70db +/-. With the radio antenna I had no reception inside the house. I also notice the same with VHF repeaters near me
I tested it with another equipment and the signals are ok.
I don't know if it's the firmware or the hardware...
I don't know if anyone else is having the same problem
Thanks !!
73s
Thanks