This is a release for the GD77 hardware type of radios, not the RT-3S type.
Stable release (2023 03 04)
Re: Stable release (2023 03 04)
Band limits setting ?KenFromNN wrote: ↑Mon Mar 06, 2023 10:43 amCan anyone remind me what to do with "out of band" error raised during transmission after update?
I remember there was discussion about it on this forum, but did not find it myself.
I just flashed my DM-1801 with new release and unexpectedly faced this error.
Are you a Ham and using the radio within the Ham bands ?
BTW. I just loaded my DM-1801 with this release and had no problem operating with the 70cm Ham band
Re: Stable release (2023 03 04)
OpenGD77.zip
2023-03-04 13:35
mam problem z tą wersją radio działa tylko w FM i FMN brak trybu DMR - Pomocy
I have a problem with this version the radio works only in FM and FMN no DMR mode - Help
2023-03-04 13:35
mam problem z tą wersją radio działa tylko w FM i FMN brak trybu DMR - Pomocy
I have a problem with this version the radio works only in FM and FMN no DMR mode - Help
Re: Stable release (2023 03 04)
You probably did not select the official / donor firmware file in the CPS
Re: Stable release (2023 03 04)
I actually forgot, thanks
Re: Stable release (2023 03 04)
Tonight it seems it's not my night.
Beside this: after the hole in the water with md 380 (not UV), I brought back my dm 1801 on which I already have a opengd77 firmware (I used it as hotspot back in 2020-2021). I want to replace the firmware with this new one, but: when I connect it with its cable, windows 11 says that the usb is not recognised. I saw that should not be any driver to install (?).
The cable is working, since it's the very same I use to program an anytone 878.
Now: what am I missing? -.-
Thanks in advance
Beside this: after the hole in the water with md 380 (not UV), I brought back my dm 1801 on which I already have a opengd77 firmware (I used it as hotspot back in 2020-2021). I want to replace the firmware with this new one, but: when I connect it with its cable, windows 11 says that the usb is not recognised. I saw that should not be any driver to install (?).
The cable is working, since it's the very same I use to program an anytone 878.
Now: what am I missing? -.-
Thanks in advance
Re: Stable release (2023 03 04)
Baofeng use a special cable. You can't use a cable for MD380 etc with a Baofengiz5wga wrote: ↑Tue Aug 08, 2023 10:18 pmTonight it seems it's not my night.
Beside this: after the hole in the water with md 380 (not UV), I brought back my dm 1801 on which I already have a opengd77 firmware (I used it as hotspot back in 2020-2021). I want to replace the firmware with this new one, but: when I connect it with its cable, windows 11 says that the usb is not recognised. I saw that should not be any driver to install (?).
The cable is working, since it's the very same I use to program an anytone 878.
Now: what am I missing? -.-
Thanks in advance